Mitsubishi Raider EGR Temperature Sensor Replacement at your home or office.

What is the EGR Temperature Sensor all about?

Vehicle manufacturers have been required for decades to lower the level of car emissions. One of the earliest methods of pollution control was the exhaust gas recirculation system, which is still in use by nearly all vehicles today. The exhaust gas recirculation (EGR) system re-introduces partially burned exhaust gases into the intake manifold along with the air/fuel mixture to complete its burn before being expelled out the tailpipe and into the atmosphere.

The EGR valve opens and closes to regulate the amount of exhaust to allow into the intake. The EGR temperature sensor is mounted in the EGR tube and measures the temperature of the exhaust gases entering the EGR valve. The engine control module receives the information from the EGR temperature sensor, determines the correct amount of flow through the EGR valve, and adjusts the valve accordingly. If the EGR temperature sensor isn’t reading properly, the EGR valve will not be open in the correct position. It can cause engine knock, which will cause internal engine damage. The Check Engine light can come on with EGR system-related codes and the emissions from the tailpipe will exceed the maximum standards set by your state’s smog/emissions test.