Mitsubishi Diamante Car jerks forward at high speeds Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(34)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(34)

Car jerks forward at high speeds Inspection Service

How much does a Car jerks forward at high speeds Inspection cost?

On average, the cost for a Mitsubishi Diamante Car jerks forward at high speeds Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mitsubishi DiamanteV6-3.0LService typeCar jerks forward at high speeds InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2004 Mitsubishi DiamanteV6-3.5LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Mitsubishi DiamanteV6-3.0LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2001 Mitsubishi DiamanteV6-3.5LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2000 Mitsubishi DiamanteV6-3.5LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Mitsubishi DiamanteV6-3.0LService typeCar jerks forward at high speeds InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Mitsubishi DiamanteV6-3.0LService typeCar jerks forward at high speeds InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1999 Mitsubishi DiamanteV6-3.5LService typeCar jerks forward at high speeds InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mitsubishi Diamante Car jerks forward at high speeds Inspection prices

When traveling at high speed, it can be particularly unsettling when your vehicle starts to jerk or surge forward without warning. Jerking or surging can be a sign of a number of different issues, each with its own ease and cost of repair. Specificity with regards to the handling of the vehicle at higher speeds, throttle responsiveness, and unusual noises, can help a mechanic better identify your vehicle’s specific problem.

How this system works:

When a vehicle receives an inconsistent or unbalanced flow of air and fuel, it will not run properly. An indication that a vehicle is not receiving the right mixture of air and fuel is if the vehicle jerks or surges forward at high speed. Several components of the fuel or air intake system could cause this jerking or surging sensation to happen. Issues within these systems can also cause fuel economy to worsen.

Common reasons for this to happen:

  • Failing Mass Airflow Sensor: The mass airflow sensor measures how much air is entering the engine and relays this information to the vehicle’s computer so the right amount of fuel can be delivered from the fuel injectors. When a mass airflow sensor begins to fail, it will typically generate an error code that triggers the Check Engine light. This warning may be accompanied by an unexpected jerking or surging sensation while driving at high speed. A vehicle with a failing mass airflow sensor may also stall soon after starting.

  • Engine Vacuum Leak: Your engine uses vacuum lines to help the computer calculate the necessary position of the fuel injectors, ensuring an appropriate fuel/air mixture. A vacuum leak may cause the engine to run inefficiently and the computer to generate an error code. A vehicle suffering from a vacuum leak may jerk while at high speed and may also struggle to idle.

  • Fuel Pump Malfunction: A vehicle’s fuel pump is responsible for moving gasoline from the fuel tank to the engine where it can be mixed with oxygen to run the engine. When a fuel pump begins to fail, it may struggle to consistently deliver the correct amount of the fuel to the engine. The fuel pump may dramatically increase pressure while failing, creating a jerking or surging sensation.  Your vehicle may also be sluggish and struggle while driving uphill or towing.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the sudden jerking or surging sensation. The mechanic will then provide a detailed inspection report outlining the cause of jerking sensation and the cost of any repairs that need to be made.

How it's done:

A mechanic will first check your vehicle by plugging in a code reader/scanner into the vehicle’s computer. The computer should be able to provide the mechanic with a better picture of what specific part or parts are failing.

If your vehicle has a bad or failing mass airflow sensor, the mechanic will begin by finding the sensor in the engine bay and checking for any signs of failure. The mechanic will check the wire harness connected to the sensor to ensure that all of wires are properly connected. After removing the sensor, the mechanic should be able to discover the nature of the failure and replace the sensor.

In order to check for a vacuum leak, the mechanic will examine the vehicle’s vacuum hoses and gasket. If he or she finds the source of the leak, the mechanic will replace the failed components and start the engine to make sure the leak has been fixed.

To check a bad fuel pump, a mechanic may have to remove the gas tank. Many modern cars have electric pumps located inside the gas tank. The mechanic will examine the fuel pump to see if it is the cause of the poor performance and jerking sensation. If it is the culprit, the mechanic will replace it and reinstall the gas tank, if necessary.

In all cases, your mechanic will make the necessary repairs and start the engine to ensure that it is now running properly. Once the repairs are completed, the mechanic can use the code reader/scanner to remove error codes and turn off the Check Engine light.

How important is this service?

A car that surges or jerks at high speed is potentially dangerous, especially in heavy traffic or in bad weather. If your vehicle jerks at high speed, you should stop driving it and have it inspected by a mechanic. Because many of the issues that would cause this jerking sensation also trigger a warning lights, being diligent and having a mechanic inspect a vehicle with a warning light can help limit potential damage and avoid more costly repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(34)

Rating Summary
30
3
0
0
1
30
3
0
0
1

Joseph

12 years of experience
2 reviews
Joseph
12 years of experience
Mitsubishi Diamante V6-3.5L - Brake Pads Replacement (Front) - Auburn, Washington
I liked the professional mannerism and quick service, he arrived and got down to business. Great service.

Nicholas

11 years of experience
597 reviews
Nicholas
11 years of experience
Mitsubishi Diamante V6-3.5L - Car is not starting - Garner, North Carolina
Nick arrived and introduced himself and asked a few background questions about the vehicle and the problem. He tested several electrical components and I left him for just a few minutes. Within that short period of time, he had successfully determined the no crank, no start issue and resolved it for me. Fortunately for me, no additional parts were needed. Thanks for a great job!

Keith

26 years of experience
231 reviews
Keith
26 years of experience
Mitsubishi Diamante V6-3.5L - Idle Control Valve - Fort Worth, Texas
Keith was on time and did the work in a timely manner. Hope the least expensive fix keeps her running for a few more months!!!

Ned

24 years of experience
52 reviews
Ned
24 years of experience
Mitsubishi Diamante V6-3.5L - Oil Change - Chandler, Arizona

Excellent Rating

(34)

Rating Summary
30
3
0
0
1
30
3
0
0
1
Number of Mitsubishi Diamante services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

P3418 OBD-II Trouble Code: Cylinder 3 Deactivation/Intake Valve Control Performance
What What the P3418 code means This code indicates that there is a problem with your intake valve on cylinder number 3. Your vehicle’s control module detects that the measured values from the TP sensor, MAP sensor, and MAF sensor...
10 Best Automotive Hand Tools
Automotive technician jobs require hand tools for repairing cars. Klutch has a 566 piece hand tool kit that comes with a lifetime guarantee.
Top 3 Reasons Engine Oil Gets in the Air Filter
Engine oil should never be in the air filter. Depending on how it got there, minor or major repairs may be needed.

Sound as if a pulley is going out on a 1999 4.6 F-150

This is really easy--take off the fan belts. Start spinning the pulleys by hand and if the pulleys have gone out, you'll feel the bearing rattling or shaking or it'll be very hard to turn. It's very easy to check...

Carb swap kills motor

Hi Tom: It's very difficult to give you a "guess" as it's always best to inspect the entire set up including your intake manifold, vacuum lines and your emissions hardware, but sometimes when you swap from an Edelbrock 4 barrel...

Grinding/scraping noise coming from back of car

Hello, thank you for writing in. If the sound is not coming from the differential, but is coming from that area, you will want to check the driveline and the axles. Look for anything that is rubbing, has a worn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com