Mini Cooper Paceman Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mini Cooper Paceman Car Thermostat Replacement is $529 with $254 for parts and $275 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mini Cooper PacemanL4-1.6LService typeCar Thermostat ReplacementEstimate$850.07Shop/Dealer Price$1029.98 - $1455.50
2014 Mini Cooper PacemanL4-1.6L TurboService typeCar Thermostat ReplacementEstimate$783.35Shop/Dealer Price$961.17 - $1380.21
2016 Mini Cooper PacemanL4-1.6L TurboService typeCar Thermostat ReplacementEstimate$921.11Shop/Dealer Price$1133.36 - $1655.72
2013 Mini Cooper PacemanL4-1.6L TurboService typeCar Thermostat ReplacementEstimate$783.35Shop/Dealer Price$961.05 - $1380.00
2015 Mini Cooper PacemanL4-1.6L TurboService typeCar Thermostat ReplacementEstimate$792.07Shop/Dealer Price$972.14 - $1397.78
2016 Mini Cooper PacemanL4-1.6LService typeCar Thermostat ReplacementEstimate$921.11Shop/Dealer Price$1133.36 - $1655.72
2014 Mini Cooper PacemanL4-1.6LService typeCar Thermostat ReplacementEstimate$797.85Shop/Dealer Price$974.97 - $1393.49
2013 Mini Cooper PacemanL4-1.6LService typeCar Thermostat ReplacementEstimate$801.63Shop/Dealer Price$981.59 - $1404.36
Show example Mini Cooper Paceman Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mini mechanics

Real customer reviews from Mini owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Luke

17 years of experience
150 reviews
Luke
17 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Oil Change - Austin, Texas
It was great

Jeremy

20 years of experience
592 reviews
Jeremy
20 years of experience
Mini Cooper Paceman L4-1.6L - Check Engine Light is on - West Palm Beach, Florida
Great attitude and work.

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Oil Change - Bryans Road, Maryland
Tyrone was very polite and helpful with the service. Definitely will use his services again. Thanks

Rodric

14 years of experience
414 reviews
Rodric
14 years of experience
Mini Cooper Paceman L4-1.6L Turbo - Loud noises when car is put in gear Inspection - Lilburn, Georgia
Rodric was courteous and professional!

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mini Cooper Paceman services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mini MECHANICS
400+
experts on our platform

Recent articles & questions

P0423 OBD-II Trouble Code: Heated Catalyst Efficiency Below Threshold (Bank l)
P0423 P0423 code definition Heated Catalyst Efficiency Below Threshold (Bank l) What the P0423 code means P0423 is an OBD-II generic code that the engine control module (ECM) got input from the heated catalyst efficiency sensor for bank 1 that...
P2303 OBD-II Trouble Code: Ignition Coil “B” Primary Control Circuit Low
P2303 P2303 code definition Ignition Coil “B” Primary Control Circuit Low What the P2303 code means P2303 is an OBD-II generic code for the engine control module (ECM) detecting a coil “B” primary control circuit low. This can be due...
How to Port and Polish Your Car Cylinder Heads
Engine performance increases when you port and polish the cylinder heads in your car. Save money by doing the job yourself instead of a shop.

Car wont start jumped it ima brake abs lights all on car dead next morning

When the IMA light is on in the hybrid Honda Civic models, this usually means that the battery pack (not to be confused with the starting battery) is no longer charging properly. This is typically is a part that has...

Check engine light flashing running rough it was low on oil

A rough idle may be caused by many different things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty Oxygen sensor or a dirty or failing idle air control valve....

What happens if you turn your wheel completely and turn it off

The position of the steering wheel has no effect on starting the car. It is just a coincidence that the car doesn't after you turned the wheel to a particular position. If the starter motor is not even cranking the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com