Mercury Sable Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(225)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(225)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Mercury Sable Wheel Bearings Replacement is $155 with $15 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercury SableV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$497.38Shop/Dealer Price$572.52 - $786.58
1995 Mercury SableV6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$382.04Shop/Dealer Price$422.09 - $535.64
1998 Mercury SableV6-3.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$264.22Shop/Dealer Price$274.86 - $300.07
2001 Mercury SableV6-3.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$264.22Shop/Dealer Price$274.86 - $300.07
1997 Mercury SableV6-3.0LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$264.22Shop/Dealer Price$277.21 - $304.19
1994 Mercury SableV6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$382.04Shop/Dealer Price$422.36 - $536.10
1998 Mercury SableV6-3.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$264.22Shop/Dealer Price$274.88 - $300.11
2003 Mercury SableV6-3.0LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$479.94Shop/Dealer Price$544.51 - $731.51
Show example Mercury Sable Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(225)

Rating Summary
212
6
0
2
5
212
6
0
2
5

Raymond

25 years of experience
137 reviews
Raymond
25 years of experience
Sable 2002 - Coolant is leaking - Apple Valley, CA
Raymond is always professional and accurate in his findings and repairs,recommend him to everyone

Hugh

10 years of experience
49 reviews
Hugh
10 years of experience
Sable 2002 - Door Latch - Englewood, CO
Did very professional job

Levi

8 years of experience
53 reviews
Levi
8 years of experience
Sable 2000 - Fuel Filter - Oklahoma City, OK
He let me know that he was going to be there earlier than expected, which was awesome, and he took care of the problem and didn’t try and up sell any work that some garage mechanics do. Will definitely be using him again for all our car needs.

Raymond

25 years of experience
137 reviews
Raymond
25 years of experience
Sable 2002 - Alternator - Apple Valley, CA
Arrived on time for the appointment, smooth accurate removal and replacement of alternator and serpentine belt, clean ,accurate and professional, great performance and personable also,I will hire Raymond for all of my further repair needs

Excellent Rating

(225)

Rating Summary
212
6
0
2
5
212
6
0
2
5
Number of Mercury Sable services completed
2475+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P0388 OBD-II Trouble Code: Crankshaft Position Sensor B Circuit High Input
P0388 means an excessive high volt signal from the crankshaft sensor was detected by the car's computer.
Tire Maintenance and Safety: How To Care For Your Tires(DELETED)
Tires need to be maintained just like every other part of your vehicle
P0673 OBD-II Trouble Code: Cylinder 3 Glow Plug Circuit
P0673 means there are issues with a computer output circuit due to defective glow plug in cylinder 3, in a module or timer and in a relay.

Do I need to fix my parking brake on my automatic car?

I would have to say yes! Cars are required to be equipped with a parking brake. The parking brake assists the transmission in keeping the vehicle stationary. When you put your vehicle in “park,” a metal rod about the size...

How do you tilt the Head Restraints?

Your car may be equipped with tilting Head Restraints. This provides additional comfort, but it’s not available on all models. If yours is so equipped, here’s how you work them: Make sure the seatback is in the right position for...

Brake, Battery sensor, lights, and a crackling noises.

The issue sounds to be a ground return wire on the speakers is shorting out with a ground circuit in the vehicle causing the lights and sensors to register a warning light. The brake light could be coming on for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com