Mercury Milan Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(86)

Throttle Body Replacement Estimate for Mercury Milan

Mercury Milan Throttle Body Replacement costs $342 on average.

CarServiceEstimateShop/Dealer Price
2011 Mercury MilanL4-2.5L HybridService typeThrottle Body ReplacementEstimate$350.49Shop/Dealer Price$425.52 - $622.69
2010 Mercury MilanL4-2.5L HybridService typeThrottle Body ReplacementEstimate$276.51Shop/Dealer Price$338.06 - $494.76
2008 Mercury MilanV6-3.0LService typeThrottle Body ReplacementEstimate$604.85Shop/Dealer Price$748.48 - $1151.44
2007 Mercury MilanL4-2.3LService typeThrottle Body ReplacementEstimate$980.53Shop/Dealer Price$1218.06 - $1902.76
2007 Mercury MilanV6-3.0LService typeThrottle Body ReplacementEstimate$604.85Shop/Dealer Price$748.50 - $1151.47
2011 Mercury MilanV6-3.0LService typeThrottle Body ReplacementEstimate$315.57Shop/Dealer Price$386.88 - $572.88
2011 Mercury MilanL4-2.5LService typeThrottle Body ReplacementEstimate$335.49Shop/Dealer Price$410.40 - $607.48
2010 Mercury MilanV6-3.0LService typeThrottle Body ReplacementEstimate$266.59Shop/Dealer Price$324.64 - $470.34
Show example Mercury Milan Throttle Body Replacement prices

Throttle Body Replacement Service

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(86)

Rating Summary
81
5
0
0
0
81
5
0
0
0

Victor

15 years of experience
9 reviews
Victor
15 years of experience
Milan 2006 - Transmission Fluid Service - Fresno, CA
Arrived earlier that scheduled time. Knowledgeable and friendly.

Walter

43 years of experience
238 reviews
Walter
43 years of experience
Milan 2006 - Air Filter - Tulsa, OK
Walter is a top notch mechanic. He does a great job. I would highly recommend him to anyone, any job, any vehicle. He's a 10 out of 10. He made sure all tasks were completed. Awesome mechanic. However, as far as the customer personal every agent wasn't good. Rosa and Julia are the only customer service personal I would ever speak with on the phone to complete another job. Both had empathy, great listening skills, effective communication, and compassion for their jobs. It could be heard. As for Jesus, Ceasar, Don, Kenya, Bianca needs more training with job coaches and should listen to my calls. They didn't listen to me and should have completed the tasks at the first call. Customer service personal are the first line of contact with the customer so everyone needs to be on the same page from the beginning, same verbage, same understanding, same information for the company. I can see Moblie Mechanics as a trend for the times , due to pandemics. People will need them to come to the house and work places to complete car mechanical needs. Thank you so much for your time. Have a great year and stay well. Sincerely yours Mary Hambright-Bender.

Chuck

4 years of experience
271 reviews
Chuck
4 years of experience
Milan 2007 - Control Arm Assembly - Irving, TX
Very informative and efficient. Will definitely use again!

Simon

25 years of experience
203 reviews
Simon
25 years of experience
Milan 2006 - Interior Door Handle - Washington, DC
Thanks so much he was great

Excellent Rating

(86)

Rating Summary
81
5
0
0
0
81
5
0
0
0
Number of Mercury Milan services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Power Brake Booster
When When you apply your brakes, you’ll feel a pressure – and that feeling is the brake booster doing its job. If you’re not feeling that extra little bit of pressure when you apply your brakes, it’s a good bet...
P0064 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2, Sensor 3)
P0064 P0064 trouble code definition Indicates that there is an abnormally high voltage or resistance present in the heater control circuit of oxygen sensor (bank 2 sensor 3). The oxygen sensor measurements only become accurate when the sensor reaches a...
P3478 OBD-11 Trouble Code: Cylinder 10 Exhaust Valve Control Performance
What What the P3478 code means When starting your vehicle, and when the vehicle is operating under a heavy weight, the engine will work in V8 mode. But when driving conditions are light, the engine will disable 4 of the...

think i put wrong oil in car went few miles lose power car dies oil in spark plugs still starts low oil blinking light before die.

Hello. If you put too thick of an oil in the car, then you may have damaged the engine bearings but this should not have caused oil to get in to the spark plugs unless the oil got into the...

Outside of an engine rebuild, what can I do to get high-end horsepower rather than the low-end torque inherent with american cars?

Hello. Due to the design of the engine, there's not much that can be done, aside from completely rebuilding the engine, to achieve high rpm power. Typically V layout engines are designed to provide low end torque and a smooth...

Power steering problems after changing the line to the pump.

The control valve in the power steering system maybe stuck causing the system to not push the fluid to the rack and pinion. Check the fluid to the power steering pump and see if the fluid has bubbles in it....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com