Mercury Milan Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(3)

Car Thermostat Replacement Estimate for Mercury Milan

Mercury Milan Car Thermostat Replacement costs $212 on average.

CarServiceEstimateShop/Dealer Price
2011 Mercury MilanL4-2.5L HybridService typeCar Thermostat ReplacementEstimate$361.60Shop/Dealer Price$430.59 - $590.12
2009 Mercury MilanL4-2.3LService typeCar Thermostat ReplacementEstimate$401.08Shop/Dealer Price$482.40 - $656.51
2010 Mercury MilanL4-2.5L HybridService typeCar Thermostat ReplacementEstimate$327.60Shop/Dealer Price$396.62 - $556.17
2008 Mercury MilanV6-3.0LService typeCar Thermostat ReplacementEstimate$237.87Shop/Dealer Price$289.74 - $417.44
2007 Mercury MilanV6-3.0LService typeCar Thermostat ReplacementEstimate$237.87Shop/Dealer Price$289.77 - $417.51
2006 Mercury MilanV6-3.0LService typeCar Thermostat ReplacementEstimate$229.15Shop/Dealer Price$278.86 - $400.04
2010 Mercury MilanL4-2.5LService typeCar Thermostat ReplacementEstimate$311.37Shop/Dealer Price$376.66 - $533.84
2011 Mercury MilanV6-3.0LService typeCar Thermostat ReplacementEstimate$234.15Shop/Dealer Price$284.09 - $405.46
Show example Mercury Milan Car Thermostat Replacement prices

Car Thermostat Replacement Service

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Mercury Milan Thermostat Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Buy Sport Shocks
Shock Shock absorbers help lessen the bumps you encounter while driving down the road. They do this by absorbing some of the energy created by driving across a rough patch of road, over speed bumps, or other road obstructions. The...
10 Best Stores to Buy Auto Parts in Tucson, Arizona
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Tucson is O’Reilly Auto Parts.
How to Replace a Windshield Wiper Blade
Car windshield wiper blades need to be replaced if you see streaks or hear scraping. Keep wiper blades in good condition to maintain good visibility.

Will a 4.0l engine and AWD 6 speed automatic from the 2007/8 Pacifica fit in the 2005 Pacifica?

You cannot use the engine and transmission combination in your vehicle. Your vehicle is not AWD and the two computer systems are not the same. The two have different wire harnesses. Different body designs lead to changes in engine cradle...

At 60 mph tachometer fluctuates between 3000 and red line

Hello. The Electric Code Detector is a component of the fuse block that detects increased electrical power needed and increases the idle speed to allow the alternator to provide more power. There is a specific test from Honda to determine...

Hey can you call(###) ###-####

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com