Mercury Country Cruiser Oil Change at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(101)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(101)

Oil Change Service

How much does a Oil Change cost?

On average, the cost for a Mercury Country Cruiser Oil Change is $110 with $38 for parts and $71 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1963 Mercury Country CruiserV8-4.7LService typeOil ChangeEstimate$162.94Shop/Dealer Price$189.62 - $252.77
1963 Mercury Country CruiserV8-3.6LService typeOil ChangeEstimate$147.94Shop/Dealer Price$174.63 - $237.79
1963 Mercury Country CruiserL6-3.3LService typeOil ChangeEstimate$147.94Shop/Dealer Price$174.63 - $237.79
1960 Mercury Country CruiserV8-5.1LService typeOil ChangeEstimate$147.94Shop/Dealer Price$174.61 - $237.76
1960 Mercury Country CruiserV8-7.0LService typeOil ChangeEstimate$147.94Shop/Dealer Price$174.64 - $237.81
1963 Mercury Country CruiserV8-4.3LService typeOil ChangeEstimate$147.94Shop/Dealer Price$174.63 - $237.79
1963 Mercury Country CruiserV8-6.4LService typeOil ChangeEstimate$151.69Shop/Dealer Price$178.28 - $241.36
1960 Mercury Country CruiserV8-6.3LService typeOil ChangeEstimate$151.69Shop/Dealer Price$178.56 - $241.85
Show example Mercury Country Cruiser Oil Change prices

What is an oil change all about?

Engine oil is the lifeblood of the engine. The oil resides in the oil pan, which is under the car attached to the bottom of the engine. All internal (moving) parts of the engine need to be lubricated by the engine oil. Inadequate lubrication will cause the parts to wear out faster and eventually lead to engine failure. An oil filter keeps the oil clean and free of debris. If the filter is not replaced on a regular basis, it will get clogged and will not be able to pass oil into the engine.

Oil Change Service

Keep in mind:

  • When the oil is changed you should always replace the oil filter.
  • Replacement oil should always match the required specifications for your vehicle.
  • After your oil has been changed, it’s a good idea to run the vehicle for a few minutes to make sure that there are no leaks.

How it's done:

  • Remove and replace engine oil and filter.
  • Check the condition of all fluids.
  • Perform basic safety inspection.
  • Start the vehicle and check for leaks in the system.

Our recommendation:

  • It is best to follow the maintenance schedule provided by the manufacturer (you can check your schedule in your YourMechanic profile).
  • We recommend replacing the oil and filter every 5,000 miles or four months.
  • Synthetic oil (versus regular) is cost effective. It’s lubrication properties are better and you will not need oil changes as frequently.
  • If you notice any fluids in your driveway, you should get your vehicle inspected immediately.
  • Do not drive your car with low engine oil. It can severely damage the engine.

What are the common symptoms indicating you need an oil change?

  • The amount of time since your last oil change exceeds the recommended miles.
  • Maintenance light is on.

How important is this service?

Regular oil changes are generally considered the most important maintenance service for your car. To avoid severe engine damage, this simple and inexpensive service should be regularly scheduled.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(101)

Rating Summary
94
5
1
0
1
94
5
1
0
1

Chris

15 years of experience
112 reviews
Chris
15 years of experience
Mercury Tracer L4-2.0L - Oil Change - Tampa, Florida
very good

James

25 years of experience
19 reviews
James
25 years of experience
Mercury Cougar V6-2.5L - Oil Change - New Orleans, Louisiana
He was knowledgeable and is a great help.

William

10 years of experience
16 reviews
William
10 years of experience
Mercury Mariner V6-3.0L - Oil Change - Las Vegas, Nevada
William was fantastic - very fast and found some additional issues on my car that needs some attention. He explained everything to me very wonderfully and I'll definitely be using his services again.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Mercury Sable V6-3.0L - Oil Change - Waddell, Arizona
Great experience with Shaun today. Friendly and punctual. As always with YourMechanic, I drove off happy and satisfied. Thank you!

Excellent Rating

(101)

Rating Summary
94
5
1
0
1
94
5
1
0
1
Number of Mercury Oil Change services completed
1111+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How to Clean Your Car to Get Ready for a Date
Everyone wants to make a good first impression on a date. Cleaning your car's interior and exterior could help you get a second date.
P0970 OBD-II Trouble Code: Pressure Control Solenoid “C” Control Circuit Low
P0970 means there is a discrepancy between the desired hydraulic pressure and the actual hydraulic pressure due to faulty solenoids.
How to Make Your Car Driver's Seat More Comfortable
The most comfortable driver's seats are car seats that are properly adjusted, have warm car seat covers, and built-in lumbar support to prevent aches.

What does the Service Traction Control message mean?

The Service Traction Control message can appear in the driver information center (DIC). When the DIC displays this alert, there is an issue with the traction control system (TCS), and your vehicle needs to be serviced. After the TCS issue...

whining noise on the rear passenger side near tire

Hey there, In regards to the whining sound that is coming from the rear passenger side on your 2003 BMW, at first glance, this type of sound could be caused by a wheel bearing that is beginning to wear out...

P2006 code - intake runner stuck closed

When you got a 1.6 volt reading from the test you did, this is not a normal test done for this code. Only a proper pinpoint done by a manufacturer approved test procedure would be able to diagnose the system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com