Mercury Colony Park Turn Signal Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,484)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,484)

Turn Signal Switch Replacement Service

How much does a Turn Signal Switch Replacement cost?

On average, the cost for a Mercury Colony Park Turn Signal Switch Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercury Colony ParkV8-5.0LService typeTurn Signal Switch ReplacementEstimate$273.76Shop/Dealer Price$307.05 - $398.82
1990 Mercury Colony ParkV8-5.0LService typeTurn Signal Switch ReplacementEstimate$264.75Shop/Dealer Price$296.27 - $386.72
Show example Mercury Colony Park Turn Signal Switch Replacement prices

What is the Turn Signal Switch all about?

The turn signal switch, located inside the car on the steering column, allows you to turn the signal bulbs on. Properly functioning turn signal lights are legally mandatory.

Keep in mind:

  • The wiring for brake lights usually goes through the turn signal switch. This means that if the turn signal switch has gone bad, your brake lights may not be working.
  • Some vehicles use a “combination” switch. This switch operates the turn signals, running lights, and headlights.

How it's done:

  • Inspect the switch, fuses, and wirings.
  • Remove and replace the switch if faulty.
  • Operate the turn signals verify operation of the exterior lights.

Our recommendation:

If your turn signal lights do not operate, your mechanic will visually inspect the fuse(s) and operate the switch a bit to see if he can determine where the problem is. Your mechanic should inspect all lights during every major service event.

What common symptoms indicate you may need to replace the Turn Signal Switch?

  • Left or right indicator light is not working.
  • Brake lights are not working.
  • Running lights or headlamps not working.
  • Unable to change from high to low beam and back.

How important is this service?

When you deploy the turn signal lever on your steering column, the turn signal switch is responsible for turning on your turn signals. Turn signals are a very important safety feature that alerts drivers all around you that your vehicle will soon be making a turn. When your turn signal switch dies, you have no way of turning on your turn signals. This not only makes your car less safe, but it is also illegal, and you can be given a very pricy fix-it ticket.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(1,484)

Rating Summary
1,395
51
9
6
23
1,395
51
9
6
23

Jose

15 years of experience
79 reviews
Jose
15 years of experience
Mercury Milan V6-3.0L - Turn Signal Switch - Tucson, Arizona
Friendly welcoming fast courteous and very efficient very punctual he needs to have a few days off with increase pay

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Mercury Grand Marquis V8-4.6L - Turn Signal Switch - Las Vegas, Nevada
RIchard was very good. He messaged me that he was running late and arrived , with the delay exactly when he said he would. He was communicative and explained what was being done. HE finished well within the time frame which was estimated, really knew what he was doing. I can only say that my dad, who was a mechanic and dealership service manager for 50 years would have been impressed by Richard. I will have no reservations about asking for him for any future service that I might require.

Torrieanto

13 years of experience
632 reviews
Torrieanto
13 years of experience
Mercury Mountaineer V6-4.0L - Wheel Stud Replacement (Driver Side Rear) - Tampa, Florida
Great

Howard

31 years of experience
92 reviews
Howard
31 years of experience
Mercury Sable V6-3.0L - Stabilizer Bar Links Replacement (Rear) - Lithonia, Georgia
Howard was on time! He replaced rear sway bar links on my car. I. very pleased with his work. He made recommendations. Very professional and great to speak with. He was very informative! I'm totally happy with the service. I'm definitely using the service again and I'll will definitely refer to friends & family. Thanks again Howard!

Excellent Rating

(1,484)

Rating Summary
1,395
51
9
6
23
1,395
51
9
6
23
Number of Mercury services completed
16324+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

P2442 OBD-II Trouble Code: Secondary Air Injection System Switching Valve Stuck Open Bank 2
P2442 P2442 code definition The P2442 code is a generic powertrain code related to the auxiliary emissions control system. This particular code appears when the bank 2 secondary air injection valve stays open. The P2442 code is also related to:...
Indiana Parking Laws: Understanding the Basics
When When driving on the roads of Indiana, abiding by the laws and regulations of the road is par for the course. However, drivers also need to make sure they abide by the laws when they are finding places to...
How to Clean Oxidized Headlights
Since vehicle manufacturers made the widespread switch in the 1980s from easily broken glass headlights to ones made of polycarbonate...

Key stuck in ignition switch

Hello, I am sorry to hear about your issue, but there is a solution. More likely than not, the ignition lock cylinder (https://www.yourmechanic.com/services/ignition-key-is-stuck-and-does-not-turn-inspection) will have to be replaced and a new key set programmed. Your keys can be released during...

Does a differential fluid change include opening, scraping, and replacing the gasket seal?

Hello. Depending on which way you choose to service the fluid, it may be necessary to remove, clean, and reseal the differential cover. As there is no drain plug on this differential housing, draining the differential fluid will either require...

My car shakes when I accelerate, but stops once I let off the gas.

Hi there. Typically when you accelerate and the engine or steering wheel is vibrating, it's due to motor or engine mounts being worn out. During acceleration, the motor mounts (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount) the engine vibrates naturally as RPM's increase. Engine mounts are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com