Mercedes-Benz S55 AMG Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz S55 AMG Camshaft Seal Replacement is $226 with $131 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCamshaft Seal ReplacementEstimate$377.85Shop/Dealer Price$468.57 - $684.47
2006 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCamshaft Seal ReplacementEstimate$357.85Shop/Dealer Price$448.61 - $664.54
2003 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCamshaft Seal ReplacementEstimate$357.85Shop/Dealer Price$448.61 - $664.54
2005 Mercedes-Benz S55 AMGV8-5.5L TurboService typeCamshaft Seal ReplacementEstimate$357.85Shop/Dealer Price$448.55 - $664.44
Show example Mercedes-Benz S55 AMG Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Car is not starting - Charlotte, North Carolina
Excellent, knowledge & honest answers & solutions

Jay

23 years of experience
184 reviews
Jay
23 years of experience
Mercedes-Benz S55 AMG V8-5.5L - Camshaft Position Sensor - Glen Ellyn, Illinois
Very friendly and knowledgable. I would definately use again.

James

30 years of experience
925 reviews
James
30 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Air is not coming out of vents Inspection - Orlando, Florida
James is a go getter he wont stop until its right...love his tenacity!

Richard

19 years of experience
82 reviews
Richard
19 years of experience
Mercedes-Benz S55 AMG V8-5.5L Turbo - Battery will not hold a charge - Cameron, North Carolina
On time and very knowledgeable, gave great recommendation.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz S55 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Brake Pedal Pad
Think Think about how often you use the brakes in your vehicle, probably very often. With that said, over time your brake pedal pad can become worn down and even lose its ridges and traction. The last thing you want...
P2094 OBD-II Trouble Code: A Fault with the B Camshaft Position Actuator Control Circuit Low Bank 2
What What the P2094 code means? The P2094 code means that the camshaft position actuator control circuit has found low system voltage present. The Engine Control Unit (ECU) detects this low voltage fault for the camshaft position actuator bank 2...
How to Get an EPA License as an Automotive Technician
Automotive technician jobs require an EPA certification to learn how about the environment while repairing automotive air conditioning systems.

Car hard to steer and feels like it is dragging something.

Hello, from your description is seems like the vehicle is possibly dragging something. Your best option is to get the aid of a mechanic to take a look and diagnose what's going on. (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection)

Fuel pump not priming

Hi. The first priority is to get the vehicle to crank over, without engine/camshaft RPM's, the engine computer will not start up the fuel pump. The starting circuit needs to be diagnosed. Some of the causes could be an ignition...

Car dies and restarts by itself

Hello, thank you for writing in. The main component that is in charge of turning off and on the vehicle is the ignition switch. You will likely want to start by inspecting and potentially replacing this switch. To truthfully know...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com