Mercedes-Benz E350 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(402)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(402)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz E350 Control Arm Assembly Replacement is $304 with $136 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1198.00Shop/Dealer Price$1458.56 - $2223.23
2013 Mercedes-Benz E350V6-3.0L Turbo DieselService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1048.32Shop/Dealer Price$1163.92 - $1478.98
2011 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$724.53Shop/Dealer Price$802.61 - $1014.14
2009 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1187.19Shop/Dealer Price$1444.09 - $2206.01
2013 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$717.27Shop/Dealer Price$810.72 - $1054.34
2008 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1187.19Shop/Dealer Price$1444.38 - $2206.53
2011 Mercedes-Benz E350V6-3.0L Turbo DieselService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$761.07Shop/Dealer Price$848.36 - $1087.36
2010 Mercedes-Benz E350V6-3.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$728.73Shop/Dealer Price$807.85 - $1022.52
Show example Mercedes-Benz E350 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(402)

Rating Summary
372
15
5
1
9
372
15
5
1
9

Simon

5 years of experience
21 reviews
Simon
5 years of experience
E350 2010 - Power steering fluid is leaking - Jacksonville, FL
5 stars

Lee

20 years of experience
10 reviews
Lee
20 years of experience
E350 2015 - Creaking noise when turning the steering wheel - Perth Amboy, NJ
Amazing service. Explained everything that was going on.

Jeremy

15 years of experience
482 reviews
Jeremy
15 years of experience
E350 2008 - Differential / Gear Oil - Boynton Beach, FL
Timely and Professional Mechanic. Highly recommend.

Brent

3 years of experience
26 reviews
Brent
3 years of experience
E350 2010 - Loud noise is coming from rear brakes - Forest Park, GA
Brent was great. He arrived 30 minutes early, and took his time to find the problem. He didn't do a rush job, and explained to me what was needed to fix the problem. I will definitely request him again.

Excellent Rating

(402)

Rating Summary
372
15
5
1
9
372
15
5
1
9
Number of Mercedes-Benz E350 services completed
4422+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Honda Fit
The The 2012 Honda Fit is a fuel efficient car that has lots of head and legroom for drivers and passengers alike. In addition, its five door configuration holds large items like skis, bikes, and surfboards for those who love...
How to Transfer a Car Title in Texas
Whenever Whenever there is a change of vehicle ownership in Texas, the title must be transferred from the previous owner’s name to that of the current owner. This applies to the buying and selling process, but also to giving a...
Child Seat Safety Laws in Idaho
Every Every state has laws governing how children are protected when they are in cars, and Idaho is no different. There are rules that cover the ways in which children must be restrained in cars, and the types of restraints...

How often should I change the coolant?

You should change your coolant every five years, or 150,000 mile-, whichever comes first.

The passenger door is stuck shut. It won't open from the inside or the outside.

You are probably correct that it is not fully unlatching. The Mini door lock actuators (part electric, part mechanical) have what is essentially a two-stage lock, and can become "double-locked". Sometimes, exercising the "unlock/lock/unlock" cycle multiple times will yield just...

Grinding noise in the front right of the vehicle.

Hi there: In most cases, when the wheel bearings go bad, they begin to make the grinding noise on turns, and is progressive as speed increases. This might be an issue with an inner axle (if you're Blazer if 4WD)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com