Mercedes-Benz E250 Brake Vacuum Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Brake Vacuum Pump Replacement Service

How much does a Brake Vacuum Pump Replacement cost?

On average, the cost for a Mercedes-Benz E250 Brake Vacuum Pump Replacement is $500 with $377 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$902.89Shop/Dealer Price$1113.99 - $1696.11
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$876.89Shop/Dealer Price$1088.03 - $1670.18
2016 Mercedes-Benz E250L4-2.1L Turbo DieselService typeBrake Vacuum Pump ReplacementEstimate$876.89Shop/Dealer Price$1088.03 - $1670.17
Show example Mercedes-Benz E250 Brake Vacuum Pump Replacement prices

What is the Brake Vacuum Pump all about?

The brake booster is a device that helps enhance the effects of the hydraulic braking system in cars as a supplement to the primary braking mechanism. Each time you push the brake pedal, the force transfers to a rod. This rod passes through the brake booster and reaches the master cylinder. The pressure from the rod activates the master cylinder piston and works on the hydraulic braking systems.

The brake booster chamber contains a vacuum the engine creates. This chamber has two sections, separated vertically by way of a rubber diaphragm. When the brake pedal pushes the rod, a small amount of air is let into the chamber on the brake pedal side through a valve that also seals off the vacuum. This air pressure on one side of the diaphragm helps enhance the force of the brake.

However, in case of cars that have turbo charging or use diesel as fuel, the engine does not create the necessary vacuum. Thus, they need an additional brake booster vacuum pump to draw out the air and create the vacuum needed for the brake booster to function. Vehicles that typically run in locations of high altitude also need a brake booster vacuum pump.

The brake booster vacuum pump reduces dependency on the engine for the vacuum and can work independently of it. This device uses an electrical control circuit to work. It activates with a signal from the brake booster vacuum sensor that monitors the levels of the vacuum in the brake booster.

Keep in mind:

  • The brake booster vacuum pump should be able to maintain up to 18” of vacuum for the brake booster to be effective.
  • If you notice that the pedal has slipped to the floor of the car and you hear a hissing sound, this could be an indication of a leak in the air line or pump to the brake booster vacuum pump.

How it's done:

  • The battery is disconnected. The faulty brake booster vacuum pump is located and identified. The vehicle is raised and supported on jack stands as needed. The engine under shield is removed for access.

  • The brake booster vacuum pump hoses and electrical connector are disconnected. The brake booster vacuum pump is removed from the mounting bracket.

  • The new brake booster vacuum pump is installed onto the mounting bracket. The hoses and electrical connector are installed to the new brake booster vacuum pump. The battery is reconnected.

  • The brakes are tested for proper brake booster vacuum pump operation. The engine shield is reinstalled. The vehicle is removed from the jack stands.

  • The vehicle is road tested and checked for proper brake booster vacuum pump and brakes operation.

Our recommendation:

If you notice the brakes are not responding as they should, book an appointment with one of our expert mechanics and have the brake booster system completely inspected. The mechanic will check the brake booster vacuum pump for damage and advise you if it needs replacing. Refer to the owner’s manual for recommendations on the frequency in which you must have the brake booster vacuum pump replaced.

What common symptoms indicate you may need to replace the Brake Vacuum Pump?

  • Delayed brake response
  • Excessive pressure is needed to make the brake respond
  • A hissing sound when you press the brake pedal
  • Brake pedal slips to the floor of the car when the engine is running and the car is stationary
  • Braking becomes especially difficult in heavy traffic areas when the brakes need to be applied in quick succession

How important is this service?

A malfunctioning brake booster vacuum pump will not create the adequate vacuum needed for the brake boosters or power brakes to function. This undermines the effectiveness of your brakes and can be a safety hazard.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Ronald

41 years of experience
323 reviews
Ronald
41 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Battery - Spring, Texas
Ron was awesome! On time, knowledgeable, fast and friendly.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Manvel, Texas
Daniel completed the service efficiently and quickly.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Check Engine Light is on - Houston, Texas
Knowledgeable and friendly. Definitely recommend.

Chris

18 years of experience
495 reviews
Chris
18 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Richmond, Texas
Chris was prompt and very professional. He was very knowledgeable. Finished with my Mercedes on time and the place he stayed and work was very clean, no mess.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz E250 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Oil Pump O-Ring
Common signs include a low level of engine oil, leaking oil covering other parts of the engine, and puddles of oil under the car.
How to Get Mercedes-Benz Dealership Certified
Mercedes Benz dealerships offer automotive technician jobs to those certified through Mercedes-Benz's Automotive Systems Technical & ELITE programs.
How to Replace a Car Radiator
Car radiators remove heat from coolant after it's cycled through the car engine. Cars overheat and damage is caused without a functioning radiator.

Code for fuel level sensor.

This means that the sensor inside your fuel tank isn't reading properly. This could mean faulty fuel gauge readings and could even leave you stranded without fuel. I suggest having a qualified technician, like one from YourMechanic to diagnose and...

Oil pan gasket and rack and pinion leaking

I would recommend having a knowledgable technician thoroughly inspect the vehicle to determine exactly where the leaks are coming from. (https://www.yourmechanic.com/services/oil-fluid-leak-inspection) A leaking pan gasket would require removal of the oil pan. A leaking rack and pinion will most likely...

My car shows a P0420 code and the engine coolant temperature reading (via torque pro app and elm327 Bluetooth reader) stayed at 84.2 degrees

Hi there - "boundary measured engine temperature," or the lowest temp reading a sensor can transmit, can be different based on each temperature sensor. The issue here is what is the true engine temperature? Is the thermostat getting the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com