Mercedes-Benz CLS63 AMG Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(28)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(28)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz CLS63 AMG Control Arm Assembly Replacement is $328 with $160 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz CLS63 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1056.32Shop/Dealer Price$1237.10 - $1722.74
2013 Mercedes-Benz CLS63 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1031.09Shop/Dealer Price$1199.51 - $1675.87
2013 Mercedes-Benz CLS63 AMGV8-5.5L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1352.27Shop/Dealer Price$1531.09 - $2015.26
2013 Mercedes-Benz CLS63 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$943.50Shop/Dealer Price$1109.29 - $1583.70
2014 Mercedes-Benz CLS63 AMGV8-5.5L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$981.14Shop/Dealer Price$1164.45 - $1673.16
2011 Mercedes-Benz CLS63 AMGV8-6.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$750.56Shop/Dealer Price$868.89 - $1199.17
2009 Mercedes-Benz CLS63 AMGV8-6.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1685.69Shop/Dealer Price$2068.93 - $3206.02
2007 Mercedes-Benz CLS63 AMGV8-6.3LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$554.08Shop/Dealer Price$641.64 - $887.59
Show example Mercedes-Benz CLS63 AMG Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0

John

33 years of experience
1126 reviews
John
33 years of experience
Mercedes-Benz CLS63 AMG V8-6.3L - Pre-purchase Car Inspection - Houston, Texas
John is amazing.. Definitely enjoyed working with him.

Chuck

18 years of experience
464 reviews
Chuck
18 years of experience
Mercedes-Benz CLS63 AMG V8-5.5L Turbo - Battery - Frisco, Texas
Chuck is excellent! He did fantastic work replacing the main battery, air filters, wiper blades and fixed the hood release handle on my CLS63 AMG. I would very much recommend him!

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Mercedes-Benz CLK350 V6-3.5L - Control Arm Assembly Replacement (Front Lower Right) - Astoria, New York
Elias was excellent! Was very knowledgable about the issue I was having and was able to do the repair very quickly. Highly recommend!

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Mercedes-Benz ML550 V8-5.5L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Scottsdale, Arizona
He did an excellent job I would highly recommended him If I require service in the future I Will request Scott

Excellent Rating

(28)

Rating Summary
26
2
0
0
0
26
2
0
0
0
Number of Mercedes-Benz Control Arm Assembly Replacement services completed
308+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Check the CV Boots on Your Car
The constant velocity boots cover each axle joint and keeps them lubricated. Signs of a bad CV boot include a clicking noise and grease leakage.
How to Lower Your Car Loan
Paying off a car loan is a long process that requires you to remain dedicated to your budget as you pay your monthly bills. Sometimes, though, whether through access to extra cash to make extra payments, refinancing of your current...
Cell Phones and Texting: Distracted Driving Laws in Oregon
Oregon Oregon defines distracted driving as a driver whose attention is diverted from the primary task of driving. Distractions are broken down into four parts which include: Manual, which means moving anything other than the steering wheel Auditory is listening...

Smell gasoline and see black smoke from exhaust

Hello. Black smoke from the exhaust is the first sign of a rich condition. This means too much fuel is entering the engine. This can be caused by a number of reasons from a leaking fuel injector to a failing...

Powertrain warning lamp.

Hello. The powertrain warning light, commonly referred to as the check engine light can come on for many reasons. If the engine computer detects an issue with the engine management, fuel, ignition, or emissions systems, it will set off the...

My 95 Mitsubishi. Eclipse is not shifting out of second gear automatic transmission was driving  then cant shift outof 2nd

1995 was about the time that everybody was switching to electronic transmission control and I believe yours was one of those. This means that a computer under the dashboard reads the signals from various electronic sensors and makes the decision...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com