Mercedes-Benz CLS55 AMG Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Mercedes-Benz CLS55 AMG Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mercedes-Benz CLS55 AMGV8-5.5L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$187.69 - $235.07
Show example Mercedes-Benz CLS55 AMG Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Carlos

21 years of experience
47 reviews
Carlos
21 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Crankshaft Position Sensor Replacement - Pearland, Texas
Carlos was very professional, efficient and thorough with his work. He's very knowlegeable in his field of work and was very cordial with offering advise. I will never go back to my old mechanic again! I recommend Carlos VERY HIGHLY!

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Control Arm Assembly Replacement (Front Lower Right) - Norcross, Georgia
Overall great service and person.

Todd

26 years of experience
95 reviews
Todd
26 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Spark Plugs - Newport News, Virginia
I appreciate his service. He is very good engineer.

Salim

30 years of experience
52 reviews
Salim
30 years of experience
Mercedes-Benz CLS55 AMG V8-5.5L Turbo - Oil/Fluid Leak - Oakland, California
Salim won't steer you wrong will tell you the truth without doing unnecessary work

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz CLS55 AMG services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Drive Manual
The The transmission allows a vehicle to switch smoothly between gears. In an automatic transmission, the vehicle computer switches gears for you. In a vehicle with a manual transmission (https://www.yourmechanic.com/article/how-a-manual-transmission-works), you must first let your foot off the gas, depress...
P3465 OBD-11 Trouble Code: Cylinder 9 Deactivation/Intake Valve Control Circuit/Open
What What the P3465 code means This code indicates that there is a problem with the exhaust valve on cylinder number 9. When your vehicle’s powertrain control module (PCM) recognizes that the measured values of the mass airflow sensor, the...
Tips for taking care of your car during smokey weather and record heat
How to protect your car against smoke, ash and extreme summer heat

Code p0420

Hello. P0420 (https://www.yourmechanic.com/article/p0420-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-1-by-jamahl-walker) could be due to a variety of faults including even a fuel pump that is not supplying sufficient fuel, causing a lean condition, and hence "fooling" the O2 sensors (pre and post) as to the status (i.e.,...

Engine stalling issue

Volkswagen has come under fire recently with several of their TDI diesel engines. Although these problems are related to engine emissions, it was also shown to cause intermittent stalling; as the computer would reduce fuel flow to create a very...

Erratic idle at stop light

Hi There, This may be a sign of a faulty MAP sensor. The Manifold Absolute Pressure (MAP) sensor senses engine load and generates a signal that is proportional to the amount of vacuum in the intake manifold. When you are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com