Mercedes-Benz C32 AMG Fuel Pressure Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Fuel Pressure Sensor Replacement Service

How much does a Fuel Pressure Sensor Replacement cost?

On average, the cost for a Mercedes-Benz C32 AMG Fuel Pressure Sensor Replacement is $982 with $811 for parts and $171 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Mercedes-Benz C32 AMGV6-3.2L TurboService typeFuel Pressure Sensor ReplacementEstimate$1875.92Shop/Dealer Price$2336.66 - $3595.12
2004 Mercedes-Benz C32 AMGV6-3.2L TurboService typeFuel Pressure Sensor ReplacementEstimate$1831.92Shop/Dealer Price$2292.76 - $3551.29
2002 Mercedes-Benz C32 AMGV6-3.2L TurboService typeFuel Pressure Sensor ReplacementEstimate$1793.92Shop/Dealer Price$2244.74 - $3495.75
Show example Mercedes-Benz C32 AMG Fuel Pressure Sensor Replacement prices

What is the Fuel Pressure Sensor all about?

In fuel-injected and diesel engines, fuel rail pressure sensors monitor the pressure in the fuel rail and report the reading to the engine control module. If any drop in pressure is detected, the engine control module compensates so that the fuel pump can restore the proper pressure. A valve controls this pressure; if the sensor ever fails, you should replace it. Sometimes, the entire fuel rail may need to be replaced, but the sensor is a weak point in the loop that is more prone to damage.

If the sensor is working properly, only the amount of fuel that is needed to make the engine run properly will be delivered. Minimal excess fuel will be circulated back to the tank in the fuel return line.

Keep in mind:

  • Other problems such as a faulty crank position sensor, cam position sensor, air flow sensor, boost pressure sensor, and temperature sensor can mimic symptoms of a bad fuel rail sensor.
  • Starting problems may have myriad causes that are entirely unrelated to sensors.

How it's done:

  • The fuel pressure is bled and battery is disconnected
  • The defective fuel rail sensor is removed
  • The new fuel rail sensor is installed
  • The battery is reconnected
  • The repair is verified and the vehicle road tested for proper operation

Our recommendation:

The fuel rail sensor is not part of a maintenance check, and is only addressed when it fails. If you suspect a problem with your fuel rail sensor or fuel delivery system, have one of our expert mechanics inspect and replace the fuel rail sensor if necessary.

What common symptoms indicate you may need to replace the Fuel Pressure Sensor?

  • Car won’t start
  • Car runs erratically
  • Check Engine light comes on and stays on

How important is this service?

If your fuel rail sensor is faulty, you may experience difficulty starting the engine or poor performance that could cause trouble in traffic. Have a failed fuel rail sensor replaced as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Fuel Filter Replacement - Winchester, California
Chris arrived and replaced the fuel filter flawlessly.

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Car is making a noise - Nashville, Tennessee
Joe is very friendly and professional, went above and beyond to address my car service needs.

Michael

27 years of experience
516 reviews
Michael
27 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Serpentine/Drive Belt - Mesa, Arizona
Great service and knowledge of Mercedes-Benz vehicles. If you need the job done right don't hesitate to ask for Michael.

Alexis

30 years of experience
94 reviews
Alexis
30 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Pre-purchase Car Inspection - Miami, Florida
Alexis was great, very helpful answered all of my questions.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz C32 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Bad Axle?
The axles transmit power from either the transmission or the differential to the drive wheels on your car. If one of your...
P0490 OBD-II Trouble Code: Exhaust Gas Recirculation "A" Control Circuit High
P0490 means the PCM has detected an abnormally high voltage within the exhaust gas recirculation system, often due to clogging.
What Does the Jack Mode Warning Light Mean?
The jack mode warning light lets you know when your car is suspended at a certain height, which may make it easier to perform service or repair on it.

Steering wheel hard to turn in 2000 Pontiac Bonneville

If your steering wheel is difficult to turn and causing your vehicle to go in a different direction than intended, you may have an issue with your rack and pinion. The rack and pinion is what is acted upon by the...

Bumping noise when car brakes going downhill

The front brake rotors are warped causing the thumping or the antilock brakes are engaging when they should not be. If the problem is in need of repairs then contact a certified mechanic, such as one from YourMechanic, to inspect...

Noises when backing up and turning.

The front strut bearings could be noisy or binding. If the front end is lifted and you turn the wheel from left to right, you may be able to detect the noise that way if that bearing is an issue....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com