Mercedes-Benz C220 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Mercedes-Benz C220 Mass Airflow Sensor Replacement is $270 with $175 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz C220L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$465.39Shop/Dealer Price$570.49 - $846.42
1995 Mercedes-Benz C220L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$445.39Shop/Dealer Price$550.52 - $826.47
1994 Mercedes-Benz C220L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$445.39Shop/Dealer Price$550.52 - $826.47
Show example Mercedes-Benz C220 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Mercedes-Benz C220 L4-2.2L - Alternator - Orlando, Florida
Knowledgeable and professional. The only mechanic I will trust with my car.

Jose

17 years of experience
154 reviews
Jose
17 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - Las Vegas, Nevada
Jose showed up right on time. He was very knowledgeable and completed the job very quickly. He also suggested some other things that I might need but was not pushy. Thank you so much!

Eladio

10 years of experience
148 reviews
Eladio
10 years of experience
Mercedes-Benz C220 L4-2.2L - Car is not shifting into park - Kernersville, North Carolina
Thank you for time yesterday we really appreciate it.

Stefan

17 years of experience
367 reviews
Stefan
17 years of experience
Mercedes-Benz C220 L4-2.2L - car is locked...key wont turn and steering wheel will not unlock. - Concord, California

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercedes-Benz C220 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an EGR Temperature Sensor Last?
Are Are you familiar with the EGR (exhaust gas recirculation) system in your car? If not, this is something all modern cars have. The purpose of this system is to greatly reduce the amount of emissions produced by your car....
How Long Does a Speed Sensor Last?
Today’s Today’s cars are equipped with a very wide range of sensors. Yours has a mass airflow sensor, at least one oxygen sensor, and many others. The vehicle speed sensor (VSS) is usually located on the transmission’s output shaft (although...
How to Replace an Exhaust Gas Recirculation (EGR) Pressure Feedback Sensor
Exhaust gas recirculation (EGR) systems use a pressure feedback sensor to tell the powertrain control module (PCM) how much exhaust gas is flowing.

Light stays on in car.

There is a good chance that the gate sensor is malfunctioning. This is not an uncommon problem. I would enlist the help of a qualified technician to pinpoint the problem and confirm that the sensor is malfunctioning.

We changed the temperature sensor because we broke it and now the check gauges light won't quit flashing, and the temperature gauge jumps to high

Assuming that your vehicle is not actually overheating, this leads me to believe that the replacement temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) is faulty or incorrectly installed. It could also be a poor electrical connection at the temperature sensor. An open circuit would...

Signals from my purge valve sensor are intermittent says the diagnosis.

Hi and thanks for contacting YourMechanic. There could be a vacuum leak at the purge valve or around the purge valve. Look to see if the gas cap closed properly, there is no cracks or other damage on the charcoal...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com