Mercedes-Benz B200 Temperature gauge is maxed out Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,558)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,558)

Temperature gauge is maxed out Inspection Service

How much does a Temperature gauge is maxed out Inspection cost?

On average, the cost for a Mercedes-Benz B200 Temperature gauge is maxed out Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz B200L4-2.0LService typeTemperature gauge is maxed out InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2010 Mercedes-Benz B200L4-2.0L TurboService typeTemperature gauge is maxed out InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Mercedes-Benz B200L4-2.0L TurboService typeTemperature gauge is maxed out InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2009 Mercedes-Benz B200L4-2.0LService typeTemperature gauge is maxed out InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2007 Mercedes-Benz B200L4-2.0LService typeTemperature gauge is maxed out InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2006 Mercedes-Benz B200L4-2.0L TurboService typeTemperature gauge is maxed out InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Mercedes-Benz B200L4-2.0LService typeTemperature gauge is maxed out InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2007 Mercedes-Benz B200L4-2.0L TurboService typeTemperature gauge is maxed out InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz B200 Temperature gauge is maxed out Inspection prices

Your car’s engine needs to maintain the right operating temperature. As it runs, it creates immense amounts of heat. Coolant is circulated through the engine to absorb heat, and then it goes back to the radiator, where the radiator fan helps wick away the collected heat. Once cooled, the coolant is then sent back into the engine to do it all again. This should keep your engine in the normal operating temperature range, but if your temperature gauge is maxed out, there could be something seriously wrong.

How this system works:

The temperature gauge in your dash is connected to the car’s computer and from there to a temperature sensor on the engine block. The sensor measures the temperature of your car’s coolant (it uses resistance, but the actual resistance values can vary drastically from one automaker to another, and from one model to another).

The information read by the sensor is sent to the car’s computer, which adjusts the temperature gauge and also plays a role in the cooling system. Depending on the temperature level, the radiator fan will cycle on and off. As the temperature of your coolant rises, the needle in your temperature gauge should rise, moving from cold to normal. However, it may move all the way to hot in some cases.

Common reasons for this to happen:

  • Low Coolant: The first suspected cause of your temperature gauge maxing out is low coolant. If this occurs, your engine can overheat, and serious damage can result, up to and including cracking the block. However, if the engine isn’t actually hot (the temp gauge is maxed out but there’s no abnormal levels of heat from the engine), this isn’t the problem.

  • Broken Temp Gauge: If the temperature gauge is maxed out but the engine isn’t actually hot, then the problem may be a broken temperature gauge. The needle may be stuck in the hot range (this can happen after overheating the engine), or a stepper gear in the gauge may be damaged.

  • Failed Temp Sensor: If the temperature sensor on your engine block has failed, it may not send any information to the system, or it may send an erroneous signal, causing the gauge to rise without any actual overheating. It’s also possible that the sensor is shorting.

  • Failed Thermostat: If your car’s thermostat sticks in the closed position, coolant will not fully cycle through the engine, and it will begin to overheat. Your temperature gauge will rise quickly, particularly if it is very warm outside.

  • Cooling Fan Motor Failure: If the motor for your radiator cooling fan fails, it will not cycle on. This reduces the amount of airflow over the radiator, meaning that much of the heat is retained by the coolant, and it will not be able to absorb more from the engine.

  • Bad Fan Switch: Another reason your radiator fan might not be working is a bad fan switch. This switch controls the cycling of your radiator fan(s), and if it fails, it can cause overheating.

  • Air in System after Coolant Service: If you’ve recently had your engine coolant drained and refilled, it’s possible there’s air in the system. Air bubbles can form and block coolant from cycling through the engine, causing it to overheat.

What to expect:

A professionally trained mobile mechanic will come to your home or office to inspect your car’s temperature gauge and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the coolant level of your vehicle, as well as the temperature sensor and other components in order to determine the cause of the gauge maxing out. It may be necessary to test drive the vehicle and verify if the engine is actually overheating, or if the problem lies with the sensor or the gauge.

How important is this service?

If your car is actually overheating, it’s a very serious problem that could quickly lead to engine-killing damage. Even if the problem is just a malfunctioning sensor or gauge, the issue is still serious, as you will have no means of observing the actual temperature of your engine coolant. One of our professional mechanics can inspect and repair your system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117

Daniel

11 years of experience
52 reviews
Daniel
11 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Temperature gauge is maxed out - Sacramento, California
Very personable. He answered all my questions. Very professional and friendly.

Chris

23 years of experience
17 reviews
Chris
23 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Car Inspection - Valley Village, California
Chris is an excellent mechanic and very friendly he knows what he is doing and how to do any technical research necessary to complete the job. Fully satisfied with him as a very competent mechanic and person.

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Mercedes-Benz C350 V6-3.5L - Drive Belt Tensioner Replacement - Oakland, California
Tien has a wonderful disposition to compliment his knowledge about his craft. He is resourceful, competent, and has the ability to put the customer at great ease, while explaining the process of his work, as well as, highlighting other areas that may be at risk for future service repair. He's very good.

Donald

40 years of experience
124 reviews
Donald
40 years of experience
Mercedes-Benz CLS550 V8-5.5L - Trunk does not lock or open - Fayetteville, Georgia
Very good

Excellent Rating

(5,558)

Rating Summary
5,170
189
54
28
117
5,170
189
54
28
117
Number of Mercedes-Benz services completed
61138+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Make an Emergency Stop in Your Car
Every driver should know the best way to brake their car. If your car brakes go out, downshift to use engine braking to slow you down.
P2629 OBD-II Trouble Code: O2 Sensor Pumping Current Trim Circuit / Open Bank 2 Sensor 1
P2629 P2629 code definition The P2629 trouble code detects a problem with the voltage signal from the oxygen sensor pumping current trim circuit of sensor 1 in bank 2. What the P2629 code means P2629 is a standard OBD-II trouble...
How to Replace a High Pressure Safety Valve
High pressure safety valves help the car engine run smoothly. Oil filter housings can burst if high pressure relief valves are stuck closed.

Engine sputtering and oil is leaking

Hello. My biggest concern would be the oil leak. I would need to locate the cause of the oil leak (https://www.yourmechanic.com/article/how-to-find-the-source-of-an-oil-leak-by-ed-ruelas) and also see how low the oil was when this issue occurred. If the engine oil was low enough,...

i am going out of town for two weeks what should i do about my car battery

Hello, thank you for writing in. Your vehicle should be fine for 2 weeks. If you think there is going to be an issue, you can disconnect the battery cables so the vehicle cannot drain it. This may reset some...

Hi I replaced the temp sensor in my car and it’s still not working so I think it’s a problem with a fuse

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com