Mercedes-Benz 600SL Car Starter Repair at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Car Starter Repair Service

How much does a Car Starter Repair cost?

On average, the cost for a Mercedes-Benz 600SL Car Starter Repair is $153 with $11 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SLV12-6.0LService typeCar Starter RepairEstimate$193.73Shop/Dealer Price$225.29 - $260.91
Show example Mercedes-Benz 600SL Car Starter Repair prices

What's a car starter motor and how does it work?

The starter motor is a powerful, compact electric motor that will turn a car’s engine over at about 200 RPM in order to start the engine. The starter is at the terminus of a circuit that includes the battery, the ignition switch, a neutral safety switch, relays and fuses.

When you turn the ignition key to start, or press the start button in some vehicles, the starter circuit is completed and the starter will run. Most starters have a small pinion gear that engages a larger ring gear on the flywheel when the starter is powered on. The pinion gear turns the engine flywheel at about 200 RPM. Since the flywheel is directly connected to the crankshaft, all engine components will then turn in sync and the engine starts.

Starter

When to replace the starter?

Starters are relatively durable but most will eventually fail in one or more of the following ways:

  • Intermittent operation of the starter. Starters can develop bad spots on the armature which will cause intermittent operation. This causes the starter to work sometimes and other times when you turn the key nothing happens.
  • Starter turns too slowly. Internal electrical and mechanical faults can cause the starter to draw too much current and in some cases the current drawn will exceed what the battery can supply. A consequence is the engine may not start as rapidly.
  • Unusual noises on starting. If you hear any type of grinding or other unusual noise while starting the engine, that should be investigated as the noise could reflect an internal starter failure or the noise could be due to pinion gear failure or flywheel ring gear damage.
  • Starter doesn’t function when turning the key. In some cases, the first symptom of a starter malfunction is a complete failure of the starter motor. This happens when you turn the ignition key to start the car, the starter motor does not function at all.

How do mechanics repair the starter?

  • If the starter is determined to be faulty, the battery must be disconnected prior to commencing any work. Once the battery is disconnected, the wiring to the starter is disconnected.
  • Starters are bolted to the engine block or the transmission case. Generally, there are two bolts. The procedure to access the starter varies across car models and can require removal, or lowering, of other vehicle components.
  • Once the starter is removed and a new starter is installed, the mounting bolts are tightened to the OEM factory torque specifications, the electrical connections are cleaned and re-attached to the starter and the starter is tested to confirm normal operation.

Is it safe to drive with a starter problem?

Once a vehicle engine is running, the starter is not in use. However, if you know that the starter is malfunctioning or working intermittently, you may be left stranded if you turn the engine off and the starter doesn’t function when restarting the engine. Should you know or suspect a problem with the starter, it is best to have the problem repaired to avoid being left stranded.

When replacing a faulty starter keep in mind:

  • Prior to replacing the starter, simple diagnostic tests should be performed to ensure that the problem is a faulty starter versus a weak battery, faulty neutral start switch, or other faulty electrical component in the starter motor circuit.
  • Starters draw large amounts of current from the battery, much more than any other electrically powered device in your car. This makes it important that the electrical connections to the battery are inspected, cleaned, and tightened as necessary. Cables to the starter should also be inspected for corrosion and replaced as needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(80)

Rating Summary
71
5
1
0
3
71
5
1
0
3

Mike

16 years of experience
17 reviews
Mike
16 years of experience
Mercedes-Benz 600SL V12-6.0L - Pre-purchase Car Inspection - Las Vegas, Nevada
Mike was on point and provided honest feedback on a pre purchase car inspection. Thank you Mike!

Chuck

10 years of experience
347 reviews
Chuck
10 years of experience
Mercedes-Benz S550 V8-5.5L - Starter - Garland, Texas
Great very professional

Arturo

27 years of experience
303 reviews
Arturo
27 years of experience
Mercedes-Benz GLK350 V6-3.5L - Starter - Chula Vista, California
Arturo was great, fast work ,knowledgeable, Friendly . Definitely will select Arturo again

Matthew

33 years of experience
1210 reviews
Matthew
33 years of experience
Mercedes-Benz E320 V6-3.2L - Starter - Newport News, Virginia
Yet again ABSOLUTELY AMAZING Skill and attention to detail.

Excellent Rating

(80)

Rating Summary
71
5
1
0
3
71
5
1
0
3
Number of Mercedes-Benz Car Starter Repair services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0207 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 7
P0207 P0207 code definition Injector Circuit Malfunction - Cylinder 7 What the P0207 code means The P0207 code is a common OBD2 diagnostic trouble code (DTC) that is set when the Engine Control Module (ECM) detects out of range performance...
P2034 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit Bank 2 Sensor 2
P2034 P2034 trouble code definition P2304 is a generic OBD-II diagnostic trouble code (DTC) referencing a malfunction with the exhaust gas temperature (EGT) circuit. This code may be seen with other EGR codes. What the P2034 code means The P2034...
How to Replace a Fuel Injector
Fuel injectors are faulty if the smell of fuel is present in the vehicle, you have engine performance issues, or the check engine light comes on.

Clicking noise under the hood? sounds like bearings..

I would think the noise is from the belt tensioner pulley or the bearing in the compressor pulley. I would have the noise checked sooner then later since a failed bearing or pulley can leave you stranded on the road...

Car overheats after city driving

There are many potential causes for your overheating concern. The engine gets hotter in stop and go traffic because air is not being forced into the radiator the way it is at higher speeds. Since you said the water pump...

Jack Stand Weight Limit

The gross vehicle weight rating (GVWR) is the maximum operating weight of the vehicle as specified by the manufacturer. GVWR includes maximum passenger capacity, maximum cargo capacity (not including towing capacity), and a full tank of gas. While it never...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com