Mercedes-Benz 600SEC Ignition Cable (Spark plug wires) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Ignition Cable (Spark plug wires) Replacement Service

How much does a Ignition Cable (Spark plug wires) Replacement cost?

On average, the cost for a Mercedes-Benz 600SEC Ignition Cable (Spark plug wires) Replacement is $627 with $487 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SECV12-6.0LService typeIgnition Cable (Spark plug wires) ReplacementEstimate$1129.96Shop/Dealer Price$1380.00 - $2115.95
Show example Mercedes-Benz 600SEC Ignition Cable (Spark plug wires) Replacement prices

What is the Ignition Cable (Spark plug wires) all about?

The ignition cables, also known as “spark plug wires” are part of the ignition system. They transfer the spark from the distributor or ignition coil to spark plugs that ignite the air-fuel mixture, starting the engine.

Over time, the cables can get weak and break down. This will make it harder for the spark to reach the engine cylinders, resulting in engine misfires. The car may not start at all. If one of the spark plugs has gone bad, the car will still start and run, but it will run poorly.

Keep in mind:

  • Ignition cable failure is often caused by other failing pieces in the ignition system; a mechanic should check for any other malfunctioning parts, and replace any parts of the system that don’t work.
  • Every time the ignition cables are replaced, the spark plugs should be inspected.
  • Leaking oil or coolant can cause ignition wire failure. If this is the case, the cause of the leak should be repaired or replaced, or else the new ignition wires will quickly be damaged as well.

How it's done:

  • Scan the computer system in the car for codes.
  • Inspect ignition cables (look for white spots).
  • Ohm test on individual cables.
  • Remove and replace the cables if found faulty.
  • Inspect the spark plugs.
  • Clear the codes.

Our recommendation:

Ignition wires should be replaced at least every 60,000 miles, but whenever your car is serviced, it’s a good idea to have the entire ignition system inspected. Any time that you have spark plugs replaced, it’s a good idea to have the ignition wires replaced as well. If you notice that your engine is running poorly, you should schedule an inspection.

What common symptoms indicate you may need to replace the Ignition Cable (Spark plug wires)?

  • Check Engine light is on.
  • Engine misfires.
  • Poor gas mileage.
  • Engine may shake (light vibration).

How important is this service?

The fuel in your automobile is ignited by a spark. This starts with the ignition coil, which transforms low voltage power into extremely high voltage. This high voltage is transferred through the ignition cables, and to the spark plug, where a spark is created that ignites the engine’s fuel, and powers the engine.

When one or more ignition cables fail, this voltage will not be transferred from the ignition coil to the spark plugs, and the fuel will not be ignited. Depending on how many of your ignition cables malfunction, your car will either run poorly, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Christian

23 years of experience
68 reviews
Christian
23 years of experience
Mercedes-Benz 420SEL V8-4.2L - Ignition Cable (Spark plug wires) - Hayward, California
Sometime he runs a little late on his appointment but the good thing about it he gives me a call and let's me know that he's stuck in traffic are whatever other variables that might occur

Herman

14 years of experience
86 reviews
Herman
14 years of experience
Mercedes-Benz 500SEL V8-5.0L - Ignition Cable (Spark plug wires) - Miami Beach, Florida
I have used his services twice and both times he has done a great job.

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Mercedes-Benz ML430 V8-4.3L - Ignition Cable (Spark plug wires) Replacement - Kennesaw, Georgia
COLLINS was very knowledgeable and worked hard on fixing my car which is now running GREAT!!! I have more work I need to book with YourMechanic and I would like to request COLLINS for all duture work!!!!!

Phillip

18 years of experience
85 reviews
Phillip
18 years of experience
Mercedes-Benz ML320 V6-3.2L - Ignition Cable (Spark plug wires) - San Antonio, Texas

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz Ignition Cable (Spark plug wires) Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Coolant Reservoir
Common signs include needing to constantly add coolant, finding coolant leaks, and the engine overheating.
How to Handle a Car Breakdown in the Middle of the Road
It's hard to know what to do when your car breaks down. If your car breaks down while driving, safely pull off the road and call for help.
3 Essential Things to Know About Snow Tires and Snow Chains
Snow Snow tires are made to grip on wet, snowy roads. Snow tires are also made of higher quality than regular all-season tires. Snow chains go over the tires of the vehicle to provide more traction while driving through snow...

How do I open the trunk?

It is very easy to unlock the trunk. When the doors are unlocked, press the tailgate release button, and then lift the trunk up. Be sure to lift the trunk all the way open, or it may begin to close...

I am swapping transmissions

You may need to look at how the 1996 bolted up and how the 1988 bolted up. If the 1996 bolts up the same as the 1988 did then use the newer design. You may find they are close to...

What's the best way to clean a turbo, exhaust manifold and injectors for shipping?

With the fuel injectors, I would simply make sure all the gasoline has dried out of them. Place them in individual locking-type plastic bags. Bubble wrap around them if you have it. The exhaust manifold should need nothing more than...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com