Mercedes-Benz 500E Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz 500E Power Steering Pressure Hose Replacement is $365 with $211 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 500EV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$591.52Shop/Dealer Price$703.71 - $1024.67
1993 Mercedes-Benz 500EV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$581.61Shop/Dealer Price$690.39 - $1008.81
Show example Mercedes-Benz 500E Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz E320 V6-3.2L - Power Steering Pressure Hose - Irvine, California
He did a great job!

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mercedes-Benz GL450 V8-4.6L - Power Steering Pressure Hose - Gainesville, Georgia
Great service. Honest! Hard to find.

Jimmi

28 years of experience
343 reviews
Jimmi
28 years of experience
Mercedes-Benz E350 V6-3.0L Turbo Diesel - Power Steering Pressure Hose - Orlando, Florida
Jimmi resolved 2 BIG issues. The first was with advice on a fix for AdBlue starts countdown which if it reached zero would have been a major headache. The second was replacement of the power steering pressure hose which I could not fin the part ANYWHERE. He found it immediately came to the house and replaced the leaking one without issue and at a small fraction of the cost Mercedes would charge. Great experience.

David

11 years of experience
199 reviews
David
11 years of experience
Mercedes-Benz ML350 V6-3.5L - Power Steering Pressure Hose - Ocoee, Florida
Great service

Excellent Rating

(12)

Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercedes-Benz Power Steering Pressure Hose Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Is It Safe to Drive With the Reduced Power Light On?
When When your Reduced Power Light comes on, that is your vehicle’s way of telling you that there is a problem, either within the charging system, or within the battery itself. It could indicate that your battery is dying, that...
Symptoms of a Bad or Failing Mass Airflow Sensor
Common signs of problems with a mass airflow sensor include running rich at idle or lean under load, decrease in fuel efficiency, and rough idles.
How to Register a Car in California
All All vehicles must be registered through the DMV of California or through CaReg, which is an online registration approved by the state. If you have just moved to California, your vehicle must be registered within 20 days of establishing...

Driver's side mirror moves straight up on its own

Your mirror switch should be disconnected after you adjust your mirrors to try and isolate a shorted mirror switch from a defective body module. If you have spilled any fluids on the mirror switch, it may be shorted inside and...

No A/C or heat and car is overheating

Hello. You may have two problems here. The engine temperature gauge behavior could be a thermostat going nuts as you describe. I would certainly check ground connections for the engine temperature sensor, and the engine-to-chassis connections in general. It may...

I have a Mitsubishi eclipse 2007 have 160000 on it, manual transmission, the oil regularly changed on time. The car have no engine

Clicking noises often originate in valve train components. The seriousness of the condition causing the noise varies a lot but can be determined in an inspection. The other issues you are referring to are electrical malfunctions. They would be resolved...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com