Mercedes-Benz 300SE Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz 300SE Fuel Injector Replacement is $531 with $391 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercedes-Benz 300SEL6-3.0LService typeFuel Injector ReplacementEstimate$936.46Shop/Dealer Price$1138.13 - $1728.95
1990 Mercedes-Benz 300SEL6-3.0LService typeFuel Injector ReplacementEstimate$927.45Shop/Dealer Price$1126.02 - $1714.53
1992 Mercedes-Benz 300SEL6-3.2LService typeFuel Injector ReplacementEstimate$2375.46Shop/Dealer Price$2912.81 - $4512.42
1993 Mercedes-Benz 300SEL6-3.2LService typeFuel Injector ReplacementEstimate$2392.12Shop/Dealer Price$2933.63 - $4545.73
Show example Mercedes-Benz 300SE Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Dave

24 years of experience
303 reviews
Dave
24 years of experience
Mercedes-Benz 300SE L6-3.0L - Car is not getting enough power - San Jose, California
Dave has integrity which I highly value.

Mack

23 years of experience
114 reviews
Mack
23 years of experience
Mercedes-Benz 300SE L6-3.0L - Alternator - Mansfield, Texas
Performed the work as needed to our satisfaction.

Nickolas

7 years of experience
54 reviews
Nickolas
7 years of experience
Mercedes-Benz 300SE L6-3.2L - Oil Change - Olathe, Kansas
Was interesting and great work!

Omar

13 years of experience
287 reviews
Omar
13 years of experience
Mercedes-Benz 300SE L6-3.0L - Pre-purchase Car Inspection - Deerfield Beach, Florida
Omar was truly amazing! Kept his word, answered calls and texts every time, arrived early, did a prompt and thorough pre purchase inspection report which will definitely influence my purchase decision and depending if the seller is willing to negotiate. I recommend Omar with 5 stars, will definitely contact again!! Thank you so much.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Mercedes-Benz 300SE services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0902 OBD-II Trouble Code: Clutch Actuator Circuit Low
What What the P0902 code means The P0902 is a generic OBD-II powertrain code, which means it applies to all makes and models of vehicles from 1996 to the present. What causes the P0902 code? There may be one or...
How to Deal With a Car Battery For Long-Term Storage
If If you store your car for the winter, or for other long periods, it’s important to make sure that your car battery is properly cared for. Long term car storage can wreak havoc on your battery. Isn't it okay...
How to Buy a Good Quality Stereo
The The term “car stereo” actually refers to the receiver – also known as the head unit or the deck – the receiver is the central processor for your vehicle audio system. Once you’ve chosen the receiver, you need to...

Do I have a problem with the electrical system?

Hi, thanks for writing in. The charging system is not very complicated. If the alternator and the battery are absolutely 100% good, no doubts about it, then the issue is likely a bad ground. Both the battery and the alternator...

burning rubber smell and loud squealing noise but only when pushing the gas pedal?

Hi there. Assuming that you're not smoking your tires, this type of noise and smell is often associated with a worn out serpentine or drive belt, as the squealing noise is caused by the belt being loose and the smell...

Does a 2010 Toyota Camry need to have its fuel filter replaced?

Toyota does not publish a specified maintenance interval for your fuel filter. However, fuel filters (https://www.yourmechanic.com/article/how-long-does-a-fuel-filter-last_2) do not last forever and thus should be changed at some reasonable interval. One hundred thousand miles is a reasonable point. YourMechanic does offer...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com