Mercedes-Benz 300SE Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Mercedes-Benz 300SE Distributor Replacement is $141 with $46 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 300SEL6-3.2LService typeDistributor ReplacementEstimate$207.19Shop/Dealer Price$247.74 - $330.02
Show example Mercedes-Benz 300SE Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1

Mack

22 years of experience
114 reviews
Mack
22 years of experience
Mercedes-Benz 300SE L6-3.0L - Alternator - Mansfield, Texas
Performed the work as needed to our satisfaction.

Andrew

26 years of experience
35 reviews
Andrew
26 years of experience
Mercedes-Benz 300SE L6-3.0L - Oil Change - Las Vegas, Nevada
Okay

Joe

23 years of experience
85 reviews
Joe
23 years of experience
Mercedes-Benz 300SE L6-3.0L - Alternator - Mansfield, Texas
Excellent work and very personable.

Nickolas

6 years of experience
54 reviews
Nickolas
6 years of experience
Mercedes-Benz 300SE L6-3.2L - Oil Change - Olathe, Kansas
Was interesting and great work!

Excellent Rating

(12)

Rating Summary
10
1
0
0
1
10
1
0
0
1
Number of Mercedes-Benz 300SE services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Child Car Seat
Today’s Today’s laws are stricter than ever before when it comes to child car seats. Parents need to be concerned about which way the seat is facing, how the seat is anchored in the car, what kind of harnessing system...
Symptoms of a Bad or Failing Oil Pump O-Ring
Common signs include a low level of engine oil, leaking oil covering other parts of the engine, and puddles of oil under the car.
How Long Does a Crankshaft Harmonic Balancer Last?
The The crankshaft harmonic balancer is also known as the crank pulley damper. It is connected to the crankshaft on the engine and reduces vibrations that originate from your engine. In addition, it serves as a pulley for the drive...

Experiencing shift shock from 1-2 and a little from 2-3 when car is cold.

Hi there. It really depends on the terms of your purchase as to what I'd recommend. If the vehicle is under warranty then it's best to let the dealership make the repairs. However, if it's not, it would probably be...

How much for replacement of rear differential pump? 2006 Ford Freestyle

Hi there - unfortunately, this is not a service YourMechanic.com offers at this time. Thanks for thinking of us though!

Blown head gasket

Without seeing the vehicle it would be hard to know if it is worth the repairs. I would recommend having a complete vehicle inspection to see if the vehicle only needs a head gasket and does not have more major...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com