Lincoln Town Car Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Lincoln Town Car Car Battery Replacement is $298 with $158 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1998 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$491.20	Shop/Dealer Price$581.55 - $838.43
2011 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.45 - $824.01
1992 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.49 - $824.08
2001 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.49 - $824.08
2000 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$572.07 - $828.59
1994 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.74 - $824.51
2002 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.52 - $824.13
2010 Lincoln Town CarV8-4.6L	Service typeCar Battery Replacement	Estimate$482.19	Shop/Dealer Price$569.49 - $824.08

Show example Lincoln Town Car Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(12)

Rating Summary

10

1

0

0

1

10

1

0

0

1

SEE REVIEWS NEAR ME

Ostus

5 years of experience

75 reviews

Ostus

5 years of experience

by Michael Archangeladidas Cushion

Town Car 2000 - Battery - Norcross, GA

Great service, thank you

Juan

10 years of experience

47 reviews

Juan

10 years of experience

by Marcelyn Bomboy

Town Car 1997 - Transmission Fluid Service - Fairfield, CA

Very professional and easy to work with!

Colby

13 years of experience

34 reviews

Colby

13 years of experience

by Jacobe Collins

Town Car 1997 - Car is not starting - Denver, CO

Was very informative and was able to get my car back and running in no time definitely recommend.

Raymond

25 years of experience

137 reviews

Request Raymond

Raymond

25 years of experience

Request Raymond

by Kina Fagan

Town Car 2005 - Oil/Fluid Leak - Victorville, CA

Very nice & great mechanic! Kind, honest, professional & patient.

Excellent Rating

(12)

Rating Summary

10

1

0

0

1

10

1

0

0

1

SEE REVIEWS NEAR ME

Recent articles & questions

P0390 OBD-II Trouble Code: Camshaft Position Sensor “B” Circuit (Bank 2)

Trouble code P0390 means the PCM does not detect the camshaft position sensor B signal and is very similar to trouble code P0345.

Is It Safe to Drive With the Air Bag Light On?

Follow these 6 tips to stay safe if your SRS, supplemental restraint system, or Air Bag light turns on.

How to Locate Cars for Sale by Private Sellers

When shopping for a used car (https://www.yourmechanic.com/article/what-steps-must-i-take-before-buying-a-used-car), dealership may not always be an option. Maybe your credit is not good enough (https://www.yourmechanic.com/article/how-to-buy-a-car-with-bad-credit), or you cannot afford to pay the asking price. In such cases, buying a car from a private...

Why does my temperature gauge go into the red when using the heater in my 1992 Chevrolet Lumina

Hello. There area lot of things that can cause this. The first thing I would check is the thermostat. If the thermostat is not opening right then this will occur. If the thermostat is fine then it may have a...

When I have my ac or heater on it only works on high and you cannot turn it off unless you turn the car off. But my back controls work perfectly.

Just did a motor swap on my 02 5.9 gas Dodge [Ram 1500](/topics-ram-1500/) it ran for about 20 min and then took it out for a drive mile down the road gauges stoped working and every it has no spark or anything

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com