Land Rover Range Rover Evoque Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(161)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(161)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Land Rover Range Rover Evoque Power Steering Pressure Hose Replacement is $585 with $403 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$1008.30Shop/Dealer Price$1218.19 - $1829.43
2012 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.46 - $1810.69
2017 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1200.70 - $1807.62
2013 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.51 - $1810.78
2015 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1205.87 - $1816.65
2014 Land Rover Range Rover EvoqueL4-2.0L TurboService typePower Steering Pressure Hose ReplacementEstimate$996.59Shop/Dealer Price$1202.83 - $1811.34
Show example Land Rover Range Rover Evoque Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(161)

Rating Summary
151
5
2
0
3
151
5
2
0
3

Charles

5 years of experience
116 reviews
Charles
5 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Brake Pads Replacement (Rear) - Hendersonville, Tennessee
Would request again when needed.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Battery - Pflugerville, Texas
Patrick took care of everything quickly and efficiently. He came prepared with the right battery and equipment and the whole thing took about 20 minutes.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Brake Pads Replacement (Rear) - Irvine, California
very honest mechanic... saved me a ton of $$$! Will definitely return. Dealership wanted $1200 and Chris did it for under $300. Wow!

Rose

7 years of experience
8 reviews
Rose
7 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Check Engine Light is on - Fort Lauderdale, Florida
Great

Excellent Rating

(161)

Rating Summary
151
5
2
0
3
151
5
2
0
3
Number of Land Rover Range Rover Evoque services completed
1771+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform

Recent articles & questions

P0185 OBD-II Trouble Code: Fuel Temperature Sensor "B" Circuit Malfunction
P0185 P0185 trouble code definition Fuel Temperature Sensor “B” Circuit Malfunction What the P0185 code means P0185 is a OBD-II generic code indicating the fuel temperature sensor B is malfunctioning. The sensor is not within specification or the fuel temperature...
P0877 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch “D” Circuit Low
P0877 means that the transmission fluid pressure that is above or below factory spec due to low fluid level, overheating engine, or faulty sensors.
How Long Does an Oil Pan Gasket Last?
Maintaining Maintaining a car is a bit easier said than done to all of the parts that are contained within your engine. One of the things that helps to keep the parts in an engine running like they should is...

Loud grinding noise coming from engine

Hello. If there is a loud noise like that coming from the engine accompanied by a misfire and fuel from the exhaust, then you may have a valve timing problem. It may be a failure in the timing chain. I...

Car vibrates and sways back and forth.

There may be a bad component in your suspension that has worn out and is causing the vibration and swaying you're experiencing. There could be various problems at fault here, I recommend having your vehicle examined by a certified mechanic...

I changed the crankcase vent tube, now the transmission won't shift

If the transmission was shifting fine prior to replacing these parts, then you need to start by double checking your work. Something may have been left loose or may not have been installed correctly. It is possible that the transmission...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com