Land Rover Discovery Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Land Rover Discovery Valve Cover Gasket Replacement is $481 with $229 for parts and $252 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2001 Land Rover DiscoveryV8-4.0L	Service typeValve Cover Gasket Replacement	Estimate$1279.26	Shop/Dealer Price$1427.09 - $1795.45
2002 Land Rover DiscoveryV8-4.0L	Service typeValve Cover Gasket Replacement	Estimate$1231.51	Shop/Dealer Price$1362.95 - $1719.03
2004 Land Rover DiscoveryV8-4.6L	Service typeValve Cover Gasket Replacement	Estimate$1231.51	Shop/Dealer Price$1363.19 - $1719.44
1999 Land Rover DiscoveryV8-4.0L	Service typeValve Cover Gasket Replacement	Estimate$1231.51	Shop/Dealer Price$1363.18 - $1719.42
1996 Land Rover DiscoveryV8-4.0L	Service typeValve Cover Gasket Replacement	Estimate$720.54	Shop/Dealer Price$845.48 - $1196.67
1994 Land Rover DiscoveryV8-3.9L	Service typeValve Cover Gasket Replacement	Estimate$749.74	Shop/Dealer Price$871.17 - $1219.74
2003 Land Rover DiscoveryV8-4.6L	Service typeValve Cover Gasket Replacement	Estimate$1231.51	Shop/Dealer Price$1363.32 - $1719.68
2000 Land Rover DiscoveryV8-4.0L	Service typeValve Cover Gasket Replacement	Estimate$1231.51	Shop/Dealer Price$1363.18 - $1719.42

Show example Land Rover Discovery Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(114)

Rating Summary

106

5

1

0

2

106

5

1

0

2

SEE REVIEWS NEAR ME

Ramon

19 years of experience

157 reviews

Ramon

19 years of experience

by David Dominguez

Rover Discovery 1996 - Bleed Brakes - Tucson, AZ

Ramon did a great job in accessing exactly what my vehicle needed. He finished the job quickly and gave me a recommendation on a few things I will need to do in the future. He is extremely knowledgeable and is now my trusted mechanic! Thank you!

Christopher

3 years of experience

23 reviews

Request Christopher

Christopher

3 years of experience

Request Christopher

by Meredith Bray

Rover Discovery 2000 - Fan speed control is not working - Denver, CO

Very friendly and honest.

Christopher

3 years of experience

23 reviews

Request Christopher

Christopher

3 years of experience

Request Christopher

by Meredith Bray

Rover Discovery 2000 - Oil Change - Denver, CO

Very friendly and honest.

Chris

15 years of experience

2435 reviews

Chris

15 years of experience

by patti thomas

Rover Discovery 2004 - Car starts and then dies - Canyon Lake, CA

Chris tried everything that he could, to get the rover working. We are going to donate it to a company. We would like to thanks Chris for all of his efforts, it was truly appreciated. Great job anyway.

Excellent Rating

(114)

Rating Summary

106

5

1

0

2

106

5

1

0

2

SEE REVIEWS NEAR ME

Recent articles & questions

Disabled Driver Laws and Permits in Florida

Florida Florida has its own specific requirements for disabled driving permits. The following are some of the rules and guidelines that you must follow in the state of Florida to qualify as a disabled driver. How do I know if...

P2263 OBD-II Trouble Code: Turbo/Supercharger Boost System Performance

Diagnostic Diagnostic Trouble Code (DTC): P2263 P2263 code definition Turbo/Supercharger Boost System Performance Related Trouble Codes: P0039: Turbo/Supercharger Bypass Valve Ctrl Circ Range/Perf...

Do I Need to Entirely Replace a Cracked Mirror?

Your Your mirrors are definitely more fragile that your windows, windshield, or rear glass. They’re thin, and the two side view mirrors are exposed to threats on a daily basis ranging from shopping carts in the parking lot to other...

Ignition not turning.

This is a common problem with the Ford Focus. Most likely, the ignition cylinder is bad and requires replacement. A certified technician, like one from YourMechanic, will be able to repair this for you (https://www.yourmechanic.com/services/ignition-key-is-stuck-and-does-not-turn-inspection).

Spraying the bottom of the car during car wash

You are just spraying the bottom. The bottom itself doesn't have any delicate stuff under there. Everything under there is sealed so you go ahead and spray under there, especially the area where you get a lot of salt in...

I Have a 2005 Dodge Durango 5.7l hemi. The pcv valve broke flush to the top of the intake manifold. Any suggestions on removal?

Any removal technique has to ensure no valve fragments fall into the area under the valve cover. Either an appropriate tool has to be threaded into the remainder to pull the valve fragment up and out or you have to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com