Jeep J-320 Windshield Wiper/Washer System Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,592)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,592)

Windshield Wiper/Washer System Inspection Service

How much does a Windshield Wiper/Washer System Inspection cost?

On average, the cost for a Jeep J-320 Windshield Wiper/Washer System Inspection is $133 with $38 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1964 Jeep J-320L6-3.8LService typeWindshield Wiper/Washer System InspectionEstimate$190.75Shop/Dealer Price$219.69 - $284.01
1965 Jeep J-320V8-5.3LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
1963 Jeep J-320L6-3.8LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.71 - $264.04
1965 Jeep J-320L6-3.8LService typeWindshield Wiper/Washer System InspectionEstimate$170.75Shop/Dealer Price$199.69 - $264.00
Show example Jeep J-320 Windshield Wiper/Washer System Inspection prices

The windshield wiper and washer system help keep a windshield clean and free of rain, dirt, sleet or snow. This system is not only a convenience but a safety system as well. Limited visibility due to a dirty windshield can make safe driving difficult or impossible.

There are a number of components in the wiper/washer system that can malfunction and cause problems. Everything from a blown fuse to a bad pump can leave a windshield dirty.

How this system works:

Windshield wipers use two different technologies to keep the windshield clean. An electric motor using a worm gear provides the power to move the wipers while a linkage converts the rotational output of the electric motor into the familiar back and forth motion of the wiper blades.

The windshield washer system uses a washer pump that is installed at the base of the washer fluid reservoir. The pump is activated by a spring-loaded switch, this switch turns on the wipers as well. The fluid is pumped through a rubber or plastic hose that runs up to windshield and separates in two lines that feed the washer nozzles on the hood of the car.

Common reasons for this to happen:

Windshield Wiper Issues

  • Worn wiper blades: Wiper blades need to be replaced on a regular basis. Worn wiper blades will not clean the windshield. Smearing or streaking are common symptoms of worn blades. If the blades chatter this can also indicate dirty or worn blades. Torn or cracking blades need to be replaced.

  • Bent or loose wiper arms: Wiper arms can become bent, usually due to vandalism. If the wiper blades are not cleaning the windshield but still appear to be in good shape loose or bent wiper arms could be the problem.

  • Malfunctioning wiper arm linkage: The linkage between the wiper motor and the blades can become damaged. The most common symptom of a broken linkage is one wiper arm not working.

  • Blown fuse: A blown fuse will cut off the electric current to the wiper motor. If both blades fail to function when turned on, a blown fuse is usually the starting point for a diagnosis.

  • Bad wiper motor: If the blades fail to operate at all, are operating slowly, only operate on one speed or do not stop in the correct position a bad or malfunctioning wiper motor could be the culprit. The motor will need to be repaired or replaced.

  • Defective wiper switch: If the wipers do not turn on when the switch is flipped, keep running after being switched off or it is impossible to select the proper speed settings the switch may be defective and will have to be replaced.

Windshield Washer Issues

  • No washer fluid: One of the most common reasons windshield washers fail to work is because the fluid reservoir is empty.

  • Blown fuse: Fuses provide overcurrent protection to all of the vehicle’s electrical units and this includes the windshield washer system. If a fuse blows, the electrical current to the washer pump will be cut off and the washer system will not work.

  • Bad windshield washer switch: The switch that turns on the windshield washer can malfunction and fail to send a signal to the pump. If this happens the pump will not work.

  • Broken washer pump: The electric pump that sends the fluid from the reservoir to the nozzles can malfunction or break.

  • Leaky washer tubes or bottle: The washer reservoir or the tubing that moves the fluid to the nozzles can crack or leak. This can lead to lost fluid on route to the nozzles, which can result in a weak spray or no spray at all.

  • Clogged washer tubes or nozzles: The tubing or the nozzles themselves can become clogged with debris. The nozzles, which are quite small can easily get clogged by dirt, leaves or other debris.

  • Frozen washer fluid: In extremely cold weather it is possible for washer fluid to freeze. If the fluid is frozen it should thaw as the car warms up.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the windshield wiper or washer system issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning windshield wiper or washer system is usually not a life or death situation but it should be addressed as soon as it is convenient. This can become a very real problem if the weather suddenly turns bad as limited visibility can make driving extremely dangerous.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96

Willie

24 years of experience
116 reviews
Willie
24 years of experience
Jeep Cherokee V6-3.2L - Windshield Wiper/Washer System Inspection - Pasadena, California
Willie was very professional and knowledgeable and went above and beyond to try and solve the problem. I would definitely request him for future jobs.

Mario

4 years of experience
24 reviews
Mario
4 years of experience
Jeep Grand Cherokee V6-3.6L - Oil Change - West Palm Beach, Florida
He was awesome and efficient.

Dustin

8 years of experience
65 reviews
Dustin
8 years of experience
Jeep Liberty V6-3.7L - Oil Change - Spring, Texas
Very efficient and polite.

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Jeep Wrangler V6-3.8L - Starter - Fort Lauderdale, Florida
Jose was great

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96
Number of Jeep services completed
72512+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You’re a Painter
If If you’re a painter, and you work for someone else, chances are you don’t care all that much about what you drive, as long as it gets you to and from work reliably. On the other hand, if you...
How to Renew Your Car Registration in Minnesota
Being Being able to drive on the Minnesota roadways is a privilege that most people neglect. If you are the owner of a vehicle, you will have to make sure that it is registered with the Minnesota Driver and Vehicle...
Veteran and Military Driver Laws and Benefits in Arkansas
The The state of Arkansas offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Vehicle registration benefits Military personnel are exempt...

Front right tire hangs lower than left tire when placed on jack stands of equal height.

Hello - your RAV4 uses torsion bars instead of springs to suspend the weight of the vehicle. Each wheel/tire carries a different amount of vehicle weight. An alignment adjusts torsion spring force to support each corner of the vehicle to...

2007 Honda Pilot Check Engine Light and VSA light on and idling at higher RPM, problem with acceleration

Hi there. The Vehicle Stability Assist light typically will trigger when the system has been disabled and it not the source of misfiring or acceleration issues in most cases. Since your check engine light is illuminated as well, it is...

my car starts but boggles out and stalls if i give it to much gas. almost as if the engine is choking

Hi there. In general, engine performance and the traction control issues you have described are not related. The crankshaft position sensor would cause misfiring or an inability to start; but in general, typically does not cause bogging or acceleration problems....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com