Jeep J-320 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Jeep J-320 Brake Master Cylinder Replacement is $267 with $172 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1965 Jeep J-320V8-5.3LService typeBrake Master Cylinder ReplacementEstimate$458.03Shop/Dealer Price$553.79 - $818.57
1963 Jeep J-320L6-3.8LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.81 - $798.60
1964 Jeep J-320L6-3.8LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.81 - $798.60
1965 Jeep J-320L6-3.8LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.79 - $798.56
Show example Jeep J-320 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Jeep Wrangler L6-4.0L - Brake Master Cylinder - Augusta, Georgia
Great Job and very Professional, will be using his services from now on.

Augustine

12 years of experience
129 reviews
Augustine
12 years of experience
Jeep CJ7 L6-4.2L - Brake Master Cylinder Replacement - Rio Rancho, New Mexico
Seems very personable and honest. Did a great job and I look forward to using him again in the future.

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Jeep Cherokee L6-4.0L - Brake Master Cylinder - Jacksonville Beach, Florida
Everything was perfect

David

25 years of experience
3 reviews
David
25 years of experience
Jeep Grand Cherokee V8-4.7L - Brake Master Cylinder - Charleston, South Carolina
David was just the mechanic I was hoping would come. He was very friendly, professional, and willing to teach along the way.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Jeep Brake Master Cylinder Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P0503 OBD-II Trouble Code: Vehicle Speed Sensor Intermittent/Erratic/High
P0503 P0503 code definition Vehicle Speed Sensor Intermittent/Erratic/High What the P0503 code means The P0503 code indicates that the Engine Control Module (ECM) has detected an inconsistent signal voltage from the vehicle speed sensor. What are the causes of the...
How to Replace an ABS Control Module
An ABS module can be a difficult part to replace depending on the manufacturer's design. You may need to reprogram and bleed the system if necessary.
How to Replace Your Car’s Idler Pulley
A serpentine belt is guided by an idler pulley. Repairing a bad pulley involves removing the belt, replacing the pulley, and reinstalling the belt.

How do I view the fuel economy feature?

The fuel economy feature displays the approximate fuel economy that your vehicle is getting at the present moment, as well as the average fuel consumption since the last reset. To access the fuel economy, press the Trip Computer switch until...

Overheating and leaking during driving

BMW had a TSB (technical service bulletin) out for a casting flaw where a leak could develop on the lower right side of the cylinder head. Good news though, that was on the M52TU engines and you have an M54...

My DPFE sensor burned up. What do you think caused this and will it do a new one the same way?

Hi and thanks for contacting YourMechanic. The delta pressure feedback of EGR (DPFE (https://www.yourmechanic.com/services/egr-pressure-feedback-sensor-replacement)) sensor was burned up for having too much back pressure on the engine. A plugged catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement) or a plugged exhaust muffler will cause the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com