Jeep Commando Cooling System Flush at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Cooling System Flush Service

How much does a Cooling System Flush cost?

On average, the cost for a Jeep Commando Cooling System Flush is $206 with $63 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1972 Jeep CommandoV8-5.0LService typeCooling System FlushEstimate$298.87Shop/Dealer Price$345.46 - $451.50
1971 Jeep CommandoL4-2.2LService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.49 - $421.55
1970 Jeep CommandoL4-2.2LService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.49 - $421.54
1972 Jeep CommandoL6-3.8LService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.45 - $421.48
1968 Jeep CommandoL4-2.2LService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.51 - $421.58
1973 Jeep CommandoV8-5.0LService typeCooling System FlushEstimate$268.87Shop/Dealer Price$315.49 - $421.54
1973 Jeep CommandoL6-3.8LService typeCooling System FlushEstimate$276.37Shop/Dealer Price$322.78 - $428.68
1966 Jeep CommandoV6-3.7LService typeCooling System FlushEstimate$276.37Shop/Dealer Price$323.34 - $429.66
Show example Jeep Commando Cooling System Flush prices

What is the cooling system flush all about?

Your cooling system is what keeps your car from overheating. It works by circulating a mixture of water and coolant through the engine. Over time the coolant mixture becomes contaminated with scale and rust, which can clog and damage the cooling system components. A cooling system flush essentially flushes out the entire system of contaminants and replaces the coolant mixture with fresh coolant and water.

Keep in mind:

Your mechanic will drain the fluid, clean the system with coolant cleaner, and use water to remove the remaining coolant. After cleaning the system, the mechanic will fill it up with new coolant. This process is effective and an approved industry method of flushing your vehicle’s cooling system.

How it's done:

  • Install flush chemical to radiator
  • Bring the car to operating temperature
  • Drain the old coolant
  • Close valve and refill with water
  • Repeat the process
  • Fill radiator with a 50/50 mixture of coolant and water
  • Check for leaks and fan operation

Our recommendation:

  • Some vehicles are equipped with a low coolant sensing system. Should this light come on, have your vehicle inspected for leaks or other possible causes for the low coolant level.

  • Follow the service maintenance schedule provided by the manufacturer to get the coolant replaced at regular intervals. In general, it is a good practice to change the coolant every 40,000-50,000 miles.

What are the common symptoms indicating you need to flush the cooling system?

  • Check Engine warning light is on
  • Low Coolant warning light is on
  • Engine is overheating

How important is this service?

A cooling system flush is an important part of preventative maintenance and helps to keep your car healthy and on the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(33)

Rating Summary
31
1
0
1
0
31
1
0
1
0

Duane

25 years of experience
510 reviews
Duane
25 years of experience
Jeep Wrangler L4-2.4L - Cooling System Flush - Oceanside, California
Knowledgeable, friendly, and quick!

Steve

15 years of experience
148 reviews
Steve
15 years of experience
Jeep Grand Cherokee V8-5.7L - Cooling System Flush - Newark, New Jersey
Great work

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Jeep Wrangler L6-4.0L - Cooling System Flush - Jacksonville, Florida
FANTASTIC service as always!

Carlos

22 years of experience
6 reviews
Carlos
22 years of experience
Jeep Cherokee L6-4.0L - Cooling System Flush - Dallas, Texas
He did a good job on replacing the parts and even replace some lights that had burned out. On the flush of the system he said he didn't have enough fluid to top off the system. The radiator fluid was still very dark and not the greenish color it should have been.

Excellent Rating

(33)

Rating Summary
31
1
0
1
0
31
1
0
1
0
Number of Jeep Cooling System Flush services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Can You Drive on a Plugged or Patched Tire?
You made it! You got your punctured tire repaired before it became damaged any further. The technician fixed it, filled...
What Causes Fuel Injectors to Get Clogged or Dirty?
Fuel injectors deliver fuel into the cylinder for combustion. Clogged fuel injectors can be caused by debris or impurities in the fuel.
Symptoms of a Bad or Failing Timing Belt
Common signs include a ticking noise coming from the engine, an engine that won't turn over, engine misfires, and oil leaking in front of the motor.

How do I use the steering wheel mode control button?

The steering wheel mode control button is on the left side of the steering wheel, and says MODE. Press this button to turn on the sound system, or, if the sound system is on, to select the audio source.

Why my car sticks in gear

Hey there. This maybe related to many different transmission components such as a speed sensors (https://www.yourmechanic.com/services/speed-sensor-replacement), the transmission control solenoid or the module itself. The transmission control solenoid (https://www.yourmechanic.com/services/downshift-solenoid-replacement) controls the flow of transmission fluid inside the transmission. Every time...

my car makes a sound like rocks rolling when i place car into drive cannot hear when in park on under load

It seems you have two separate problems. The "rocks rolling around a tin can" sound is most commonly from the exhaust system. Possibly a broken / loose baffle in the muffler or resonator. Most commonly would be a heat shield...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com