Jeep Commando Brakes must be pumped to work Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,675)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,675)

Brakes must be pumped to work Inspection Service

How much does a Brakes must be pumped to work Inspection cost?

On average, the cost for a Jeep Commando Brakes must be pumped to work Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1972 Jeep CommandoV8-5.0LService typeBrakes must be pumped to work InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1970 Jeep CommandoV6-3.7LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1968 Jeep CommandoV6-3.7LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1972 Jeep CommandoL6-4.2LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1970 Jeep CommandoL4-2.2LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1967 Jeep CommandoL4-2.2LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1972 Jeep CommandoL6-3.8LService typeBrakes must be pumped to work InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1973 Jeep CommandoV8-5.0LService typeBrakes must be pumped to work InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep Commando Brakes must be pumped to work Inspection prices

When you slow your car or decide to stop, you press the brake pedal. Most of the time, the pedal will be firm and you’ll be able to apply steady pressure until you reach the desired slower speed, or come to a complete stop. However, sometimes the pedal may “go to the floor” and you’ll have to pump it a couple of times to get the firm feel that you’re used to. If your brakes must be pumped to work, there’s a serious issue that needs to be addressed.

How this system works:

Your brakes work on fluid pressure. If the braking system isn’t able to build up the pressure necessary to operate the system, your pedal will feel strange. In some cases, it will be spongy and soft. In others, you’ll have to pump the brakes.

When you press the brake pedal, the master cylinder sends fluid into the lines, creating pressure. This activates the calipers, which squeeze the rotor on each wheel between the brake pads. Drum brakes work on a similar basis, but fluid pressure causes the actuator to press the shoes out against the sides of the drum to slow down the wheels.

Obviously, if there isn’t enough pressure in the lines, this doesn’t happen. However, if moisture has gotten into the system, the result can be similar. Water has a lower boiling point than brake fluid. When it’s heated at the brakes, it vaporizes, creating air in the lines (and allowing compression – brake fluid cannot be compressed).

Common reasons for this to happen:

  • Air in the Lines: The number one most common cause for having to pump your brakes to get them to work is air in the lines. This may be because your brakes were recently serviced but not bled correctly. It requires bleeding each wheel several times, starting with the wheels farthest from the master cylinder (passenger rear, driver rear, then passenger front and driver front). It can take multiple bleeds to remove all the air from the lines, even after a basic service. The fluid will then need to be topped off.

  • Low Brake Fluid: If your brake fluid is low (and it’s not due to brake pad wear), then the system will be unable to create enough pressure for normal operation and you may have to pump the pedal. Generally, low fluid is caused by a leak somewhere in the system, including at the caliper, the brake lines, or even the master cylinder.

  • Failing Master Cylinder: While rare, master cylinder failure does occur. If the master cylinder has begun leaking fluid down the back of the engine, you can expect to experience poor brake operation and reduced safety on the road.

  • Moisture in the Fluid: If your brake fluid has absorbed moisture (which is normal over time and through regularly wear and tear), you’ll notice reduced braking performance, including the possibility that you’ll have to pump the brake pedal in some situations.

  • Damaged or Missing Bleeder Valve: Each wheel should have a brake fluid bleeder valve on the line near the wheel hub. If one of yours has been damaged, it’s possible that you’re leaking fluid and allowing air into the line at the same time.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system. The mechanic will visually inspect the master cylinder, the brake lines, calipers, and the rest of the system in order to determine the underlying cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire brake system, which may require the removal of one or more wheels. The mechanic will also need to check for air in the lines, as well as leaks in the lines and at the master cylinder.

How important is this service?

If your brakes have to be pumped to work, your system needs immediate service. This indicates a significant problem, including air in the lines. It reduces your stopping capability on the road, which endangers you, your passengers, as well as others on the road. One of our mechanics can diagnose and repair the problem, ensuring that you’re safe while driving.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6,675)

Rating Summary
6,332
186
36
24
97
6,332
186
36
24
97

Scott

34 years of experience
556 reviews
Scott
34 years of experience
Jeep Grand Cherokee L6-4.0L - Brakes must be pumped to work - Arvada, Colorado
Great

Amir

16 years of experience
26 reviews
Amir
16 years of experience
Jeep CJ7 L6-4.2L - Brakes must be pumped to work Inspection - Rio Rancho, New Mexico
Seemed very personable and knowledgeable. I look forward to having him back to do some more work.

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Jeep Grand Cherokee V8-4.7L - Brakes must be pumped to work - Missouri City, Texas
He was great! He figured what was wrong in a couple of minutes if even that. He told what part I needed which was is an easy fix. He was able to clear the check engine light.

Derrick

11 years of experience
174 reviews
Derrick
11 years of experience
Jeep Cherokee L6-4.0L - Tie Rod End Replacement (Front Left Inner, Front Right Inner, Front Left Outer, Front Right Outer) - San Francisco, California
amazing. incredibly professional and very friendly!

Excellent Rating

(6,675)

Rating Summary
6,332
186
36
24
97
6,332
186
36
24
97
Number of Jeep services completed
73425+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Volvo C30
This This compact, 3-door hatchback is a truly unique piece of automobile engineering. Unlike anything else on the road, the C30’s eye-catching progressive appearance is just as savvy as its minimalist, yet premium interior. The performance isn’t anything to scoff...
B1267 OBD-II Trouble Code: Servo Motor Airintake Right Circuit Failure
B1267 means there is a malfunction with the servo motor air intake right circuit, likely caused by a faulty server, stuck vent, or damaged component.
How to Replace an Exhaust Gas Recirculation (EGR) Tube
The EGR valve is connected to an EGR pipe, which helps distribute molecules through your vehicle’s EGR system. A bad pipe leads to performance issues.

Brakes out hitting hole

Hi there, thanks for writing in about your 2000 Ford E-250. Some master cylinders will let in just a little bit of air when the fluid is splashed around too much in the reservoir, which is likely what has happened to yours....

Can a bad tensioner cause my vehicle to lose acceleration and turn off?

Hi Brandon. Typically a damaged belt tensioner will not impact vehicle performance. It would cause the serpentine or drive belt to wear prematurely or to squeak - but not cause the acceleration issue. On your list of items replaced, I...

Can I get the manufacturer code on my radio?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com