logo

Hyundai Scoupe Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(63)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(63)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Hyundai Scoupe Control Arm Assembly Replacement is $279 with $83 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1048.78Shop/Dealer Price$1149.29 - $1413.54
1993 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1963.09Shop/Dealer Price$2294.41 - $3269.39
1995 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$370.75Shop/Dealer Price$414.94 - $541.66
1995 Hyundai ScoupeL4-1.5L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1007.33Shop/Dealer Price$1099.82 - $1358.07
1995 Hyundai ScoupeL4-1.5L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$370.75Shop/Dealer Price$417.00 - $545.27
1993 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1963.09Shop/Dealer Price$2295.17 - $3270.72
1993 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1963.09Shop/Dealer Price$2294.60 - $3269.72
1994 Hyundai ScoupeL4-1.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1963.09Shop/Dealer Price$2294.52 - $3269.59
Show example Hyundai Scoupe Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Hyundai Control Arm Assembly Replacement services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(63)
Rating Summary
59
3
0
0
1
59
3
0
0
1

Jeremy

21 years of experience
802 reviews
Request Jeremy
Jeremy
21 years of experience
Request Jeremy
by David
Hyundai Sonata V6-3.3L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Lake Worth, Florida
Like last time, exactly on time and did a great job.

Chris

16 years of experience
112 reviews
Request Chris
Chris
16 years of experience
Request Chris
by Paul
Hyundai Sonata L4-2.4L - Control Arm Assembly Replacement (Front Upper Left) - Tampa, Florida
Excellent

Tabitha

18 years of experience
379 reviews
Request Tabitha
Tabitha
18 years of experience
Request Tabitha
by Thomas
Hyundai Accent L4-1.6L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - San Diego, California
She was great all the way around.....On time, friendly, good service....no complaints whatsoever

William

35 years of experience
731 reviews
Request William
William
35 years of experience
Request William
by Jeff
Hyundai Sonata V6-2.7L - Control Arm Assembly Replacement (Rear Upper Left, Rear Upper Right) - Glendale, Arizona
This is the second time I've had William wolf work on my vehicle William always does a great job and my vehicle runs much better after he works on it!

Excellent Rating

(63)
Rating Summary
59
3
0
0
1
59
3
0
0
1
Number of Hyundai Control Arm Assembly Replacement services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

The Difference Between a Throttle Body Position Sensor & Throttle Body Temperature Sensor
Though both part of the fuel injection system, the TPS and throttle body temp sensor monitor specific aspects of the fuel/air mixture.
Read more
P0890 OBD-II Trouble Code: Traction Control Module (TCM) Power Relay Sense Circuit Low
P0890 means there is an issue with the communication circuit for the traction control module, possibly due to a defective ON/OFF switch.
Read more
How to Troubleshoot a Gas Cap That Won't Come Off
Gas caps stick and won't come off when the gas cap is broken, there's a mechanical defect in the gas tank filler neck, or gas cap is locked.
Read more

Air suspension problem

This can be the result of many different situations. If the vehicle is sitting very low, one of the air bags may be leaking air. The pump runs on a fused circuit and the pump can short out or a...
Read more

If I can hear my fuel pump does that mean its not bad?

Hello. If the fuel pump is loud then that can mean that it is failing. I have also had many fuel pumps make noise for quite some time without having any issues. The only way to know for sure would...
Read more

I did take it to get aligninment but they told me to replace all four [ball joint](/topics-ball-joint-chevy/). I had already replaced 1 a month prior so i think they were not being honest. I replaced two more ball joints and went to check tje othwr side and there was no play when i mobed the tire with my hands

Read more
  1. Home
  2. Estimates
  3. Hyundai
  4. Scoupe
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE