Hyundai Azera Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(141)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(141)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Hyundai Azera Front Crankshaft Seal Replacement is $214 with $18 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Hyundai AzeraV6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$297.64Shop/Dealer Price$322.84 - $387.10
2008 Hyundai AzeraV6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$285.03Shop/Dealer Price$307.75 - $370.16
2013 Hyundai AzeraV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$255.41Shop/Dealer Price$267.30 - $296.71
2007 Hyundai AzeraV6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$285.03Shop/Dealer Price$307.79 - $370.22
2008 Hyundai AzeraV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$285.03Shop/Dealer Price$309.85 - $373.83
2009 Hyundai AzeraV6-3.8LService typeFront Crankshaft Seal ReplacementEstimate$285.03Shop/Dealer Price$307.98 - $370.56
2012 Hyundai AzeraV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$255.41Shop/Dealer Price$267.32 - $296.74
2007 Hyundai AzeraV6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$240.81Shop/Dealer Price$252.51 - $281.78
Show example Hyundai Azera Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(141)

Rating Summary
134
7
0
0
0
134
7
0
0
0

Braxton

12 years of experience
205 reviews
Braxton
12 years of experience
Hyundai Azera V6-3.8L - Thermostat - Kissimmee, Florida
Great mechanic always on time clean and knowledgeable.

Zachery

9 years of experience
14 reviews
Zachery
9 years of experience
Hyundai Azera V6-3.8L - Water Pump - Hilliard, Ohio
It was a slow start because we had to reschedule due to weather. Zach did a phenomenal job, I'm so pleased with his job. Would gladly refer him and my mechanic. Thank you so much!

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Hyundai Azera V6-3.8L - Brake Pads Replacement (Front, Rear) - Atlanta, Georgia
Tinashe was very professional and he got the work done so quickly. He also pointed out issues that would need to be fixed. It was nice working with Tinashe.

Josue

12 years of experience
26 reviews
Josue
12 years of experience
Hyundai Azera V6-3.8L - Automatic Transmission Fluid Service - Sacramento, California
Josue was on time and he was able to finish before the estimated time. He also was able to suggest some future work that needs to be done.

Excellent Rating

(141)

Rating Summary
134
7
0
0
0
134
7
0
0
0
Number of Hyundai Azera services completed
1551+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

B1980 OBD-II Trouble Code: Bulb Outage Condition Detected
B1980 means there is a bulb outage condition in the vehicle, likely due to damaged wires, harnesses, or fuses in the system, or a bad bulb.
The Guide to Legal Car Modifications in Illinois
ARENA Creative / Shutterstock.com Whether you want to modify your vehicle while living in Illinois, or you are moving to the state with a modified vehicle, you need to know the laws to ensure you are street...
Mississippi Parking Laws: Understanding the Basics
A A big part of the responsibility of driving is knowing where to park legally and safely. Mississippi drivers should take the time to understand the rules and laws of parking in the state and apply them. If they do...

Engine makes really loud noise like a motorcycle 1998 Lincoln Navigator

Hi there - your symptom description suggests that an engine backfire in the exhaust has caused the muffler or catalytic converter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-catalytic-converter) to rupture. This would explain the noisier running and some of the smell you are experiencing. Check first...

p1516 code on 03 v6 mustang. what should i ask to be fixed?

Although a diagnostic would have to be performed, the code you are reporting is usually a consequence of a fault in the intake manifold runner control (IMRC). To rule the IMRC system in or out, the recommended diagnostic is an...

The car stalls won't drive

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com