Honda Crosstour Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(53)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Honda Crosstour Wheel Bearings Replacement is $323 with $183 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Honda CrosstourV6-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$520.28Shop/Dealer Price$615.20 - $891.86
2012 Honda CrosstourV6-3.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.42 - $879.76
2014 Honda CrosstourL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.45 - $879.80
2014 Honda CrosstourV6-3.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.45 - $879.80
2013 Honda CrosstourL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$605.92 - $882.38
2012 Honda CrosstourL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.59 - $880.05
2015 Honda CrosstourL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.46 - $879.83
2013 Honda CrosstourV6-3.5LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$511.27Shop/Dealer Price$604.45 - $879.80
Show example Honda Crosstour Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(53)

Rating Summary
53
0
0
0
0
53
0
0
0
0

Damian

12 years of experience
465 reviews
Damian
12 years of experience
Honda Crosstour L4-2.4L - Oil Pan Gasket - Suitland, Maryland
Did a great good and walk me through everything what I think was great keep up the good work

Stacy

25 years of experience
511 reviews
Stacy
25 years of experience
Honda Crosstour L4-2.4L - Oil Change - McDonough, Georgia
Stacy arrived on time, very professional, and quick!! Will definitely recommend!!! Thank you Stacy!!

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Honda Crosstour V6-3.5L - Brake Pads Replacement (Front) - Bowie, Maryland
Dellano was great! He installed my front brakes and rotors. I will request him for future services.

Jeffrey

19 years of experience
104 reviews
Jeffrey
19 years of experience
Honda Crosstour L4-2.4L - Car is not starting - Marietta, Georgia
Outstanding job!!!!

Excellent Rating

(53)

Rating Summary
53
0
0
0
0
53
0
0
0
0
Number of Honda Crosstour services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in Oklahoma
Oklahoma Oklahoma parking law: understanding the basics The parking laws in Oklahoma are in place to help keep people safe and to ensure that traffic is able to flow properly. People who park incorrectly or in locations that are dangerous...
Symptoms of a Bad or Failing Power Steering Pump
If you hear squealing noises, the steering wheel feels stiff, or find damage on the power steering belt, have the power steering pump replaced.
A Buyer’s Guide to the 2012 Jaguar XF
The The Jaguar name alone represents luxury, performance and prestige in the world of high-end vehicles. The XF was completely retooled in 2009, a sign of the premium carmaker’s efforts to draw in younger consumers and attract a whole new...

Are Cracked Hoses Repairable, or Should They Be Replaced?

Cracked hoses are unsafe (https://www.yourmechanic.com/article/can-cracked-hoses-be-repaired-or-do-they-need-to-be-replaced) for the proper operation of your vehicle and should be replaced at your earliest convenience. There is no way to repair a worn hose, nor would you want to. Hoses are designed to transfer engine...

my battery wont charge and its good and altenator is to whats wrong

If the battery will not hold a charge (https://www.yourmechanic.com/services/battery-will-not-hold-a-charge-inspection), then it may be bad or has a draw on it causing the drain. I recommend having the battery checked to see if the battery has a draw. Check to make...

Belt squeaks on start-up when cold or damp outside but squeak only last for few minutes

You should have the belt and tensioner checked to see if the belt is worn or stretched beyond its limit causing the tensioner to not keep it tight and allowing it to slip when damp or wet. Remove the belt...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com