Honda Crosstour Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(53)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Honda Crosstour Water Pump Replacement is $301 with $133 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Honda CrosstourV6-3.5LService typeWater Pump ReplacementEstimate$1412.94Shop/Dealer Price$1632.61 - $2260.82
2012 Honda CrosstourL4-2.4LService typeWater Pump ReplacementEstimate$999.13Shop/Dealer Price$1207.31 - $1826.92
2015 Honda CrosstourL4-2.4LService typeWater Pump ReplacementEstimate$894.02Shop/Dealer Price$1037.85 - $1459.74
2014 Honda CrosstourL4-2.4LService typeWater Pump ReplacementEstimate$733.43Shop/Dealer Price$875.22 - $1295.57
2013 Honda CrosstourL4-2.4LService typeWater Pump ReplacementEstimate$733.43Shop/Dealer Price$876.99 - $1298.66
2015 Honda CrosstourV6-3.5LService typeWater Pump ReplacementEstimate$893.02Shop/Dealer Price$967.93 - $1173.31
2014 Honda CrosstourV6-3.5LService typeWater Pump ReplacementEstimate$820.02Shop/Dealer Price$893.46 - $1097.74
2012 Honda CrosstourV6-3.5LService typeWater Pump ReplacementEstimate$1553.89Shop/Dealer Price$1769.16 - $2394.08
Show example Honda Crosstour Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(53)

Rating Summary
53
0
0
0
0
53
0
0
0
0

Brent

9 years of experience
87 reviews
Brent
9 years of experience
Honda Crosstour V6-3.5L - Power Steering Return Hose - Decatur, Georgia
Brent is a true professional and did everything to address my issue. He went above and beyond the call of duty to help me. I am grateful for his hard work and service.

Brandon

21 years of experience
773 reviews
Brandon
21 years of experience
Honda Crosstour V6-3.5L - Ignition Coil - Lake Mary, Florida
Brandon is awesome!!!!!

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Honda Crosstour V6-3.5L - Pre-purchase Car Inspection - Yonkers, New York
Steve is the best you can get with or without a prescription. His assessment was spot on, concise and he made me feel as though I did the inspection myself. I went to the deal with my knowledge and bargaining chip proud. If you get Steve, you’re in good hands. Thanks again. JB

Marvin

7 years of experience
71 reviews
Marvin
7 years of experience
Honda Crosstour V6-3.5L - Oil Change - Las Vegas, Nevada
Marvin was fast and friendly

Excellent Rating

(53)

Rating Summary
53
0
0
0
0
53
0
0
0
0
Number of Honda Crosstour services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Hyundai Sonata
Hyundai Hyundai has been making a real name for itself in the midsize sedan class in the past few years, and the 2012 Hyundai Sonata is no exception. With an attractive price tag, a great warranty, and a choice of...
P2069 OBD-II Trouble Code: Fuel Level Sensor B Circuit Intermittent
P2069 P2069 code definition Fuel Level Sensor B Circuit Intermittent What the P2069 code means P2069 is an OBD-II generic code for the engine control module (ECM) detecting the fuel level sensor B signal is intermittent. The sensor output voltage...
How to Replace Your Power Antenna
Car Car antennas are unfortunately open to the elements when driving, and as a result, are likely to get damaged at some point in time. To prevent this damage, manufacturers started using retractable antennas that will hide away when not...

How do I turn on panic mode?

To turn on panic mode, press the panic button on the remote transmitter. When panic mode is turned on, the horn will honk and the lights will flash for roughly 30 seconds. To turn off panic mode, press any button...

My car won't detect my car key.

There is a technical bulletin 13-5-32 that covers this problem of no start with any key. The TSB says that the vehicle will need to have the anti-theft system radio transceiver module reprogrammed using the dealer IDS system with the...

My timing belt broke, is there a chance there is no damage? 2000 Dodge Neon

Unfortunately, the valves are most likely bent along with possible piston damage. The 2.0ltr in both single and double-overhead-cam configurations are interference engines. The valves and pistons occupy the same space. The job of the timing belt is to keep...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com