Honda Clarity Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Honda Clarity Wheel Bearings Replacement is $278 with $138 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Honda ClarityElectricService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$431.42Shop/Dealer Price$504.13 - $714.14
2017 Honda ClarityElectricService typeWheel Bearings - Driver Side Rear ReplacementEstimate$422.41Shop/Dealer Price$493.35 - $702.04
2018 Honda ClarityL4-1.5L HybridService typeWheel Bearings - Driver Side Rear ReplacementEstimate$422.41Shop/Dealer Price$493.37 - $702.08
2018 Honda ClarityElectricService typeWheel Bearings - Driver Side Rear ReplacementEstimate$422.41Shop/Dealer Price$493.37 - $702.08
2018 Honda ClarityElectricService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$422.41Shop/Dealer Price$494.85 - $704.66
2018 Honda ClarityL4-1.5L HybridService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$422.41Shop/Dealer Price$493.51 - $702.33
Show example Honda Clarity Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Faraz

23 years of experience
142 reviews
Faraz
23 years of experience
Honda Clarity L4-1.5L Hybrid - Oil Change - Dublin, California
Faraz was curteous and did the service well

Marco

30 years of experience
329 reviews
Marco
30 years of experience
Honda Clarity L4-1.5L Hybrid - Oil Change - Corona, California
Professional! thanks

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Honda Clarity L4-1.5L Hybrid - Oil Change - Oakland, California
Tien is the best!

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Honda Clarity L4-1.5L Hybrid - Brake System Flush - El Sobrante, California
Derrick was on time, professional, and did a fantastic job. At the end of the service he went through exactly what he did (with photo proof), which I really appreciated. Aside from major repairs, I have no reason to go to the dealer now. Highly recommended!

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Honda Clarity services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 BMW X5 xDrive35d
The The 2012 BMW X5 xDrive35d offer contour seats and smooth acceleration. The suspension offers a smooth ride to the driver and passengers in the vehicle, even for long road trips. It can handle tight curves without any problem while...
P2005 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Open Bank 2
P2005 P2005 trouble code definition P2005 is a general OBD2 trouble code that indicates a malfunction with the intake manifold runner control circuit. This code is similar to P2006, P2007, P2008, P2009, P2010, P2013 and P2015. What the P2005 code...
The Guide to Legal Car Modifications in North Carolina
ARENA Creative / Shutterstock.com North Carolina has a variety of laws in place that govern modified vehicles. If you live in the state or are planning on moving to it, you need to make sure your modified...

will a bad compressor cause the fan to not come on? No fan, no cool air?

The A/C fan (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-cooling-radiator-fan-motor) for the condenser will not come on if the A/C compressor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ac-compressor) does not come on. The fan will only come on when the pressure of the A/C system is detected. This is likely why it...

Engine shaking

Shaking or vibrating may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below the...

Weird noise

The gurgling sound you hear is likely coolant at work inside your radiator and heater core. The gurgling sound can be produced a few different ways. If the cooling system was not properly flushed the last time the coolant was...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com