GMC Sierra 1500 Classic Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a GMC Sierra 1500 Classic Car Thermostat Replacement is $238 with $84 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 1500 ClassicV6-4.3LService typeCar Thermostat ReplacementEstimate$339.08Shop/Dealer Price$385.19 - $514.59
2007 GMC Sierra 1500 ClassicV8-5.3L HybridService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$424.16 - $582.60
2007 GMC Sierra 1500 ClassicV8-4.8LService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$424.18 - $582.65
2007 GMC Sierra 1500 ClassicV8-6.0LService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$424.18 - $582.64
2007 GMC Sierra 1500 ClassicV8-5.3LService typeCar Thermostat ReplacementEstimate$369.83Shop/Dealer Price$425.80 - $585.48
Show example GMC Sierra 1500 Classic Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

William

21 years of experience
129 reviews
William
21 years of experience
GMC Sierra 1500 Classic V8-5.3L - Oil Pressure Sensor - Estero, Florida
Very good work. I will use William again.

Philippe

8 years of experience
4 reviews
Philippe
8 years of experience
GMC Sierra 1500 Classic V8-5.3L - Car is not starting - Cherry Hill, New Jersey
Very helpful and knowledgeable

Michael

28 years of experience
672 reviews
Michael
28 years of experience
GMC Sierra 1500 Classic V8-5.3L - Other Inspections - Phoenix, Arizona
Great prompt service. Very professional. I would recommend Michael to all my friends and family

David

26 years of experience
180 reviews
David
26 years of experience
GMC Sierra 1500 Classic V8-4.8L - Heater Blower Motor Resistor - Ocala, Florida
David was amazing. The part was difficult to find but he made numerous phone calls and drove to at least two different part stores to locate it, then he finished the work and did a very good job. I highly recommend him. Very friendly and knows his stuff.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of GMC Sierra 1500 Classic services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How to Know When Your Transmission Is Not Working
Most vehicles use some sort of transmission to transfer the power generated from the engine, into usable power that can turn the wheels....
How Long Does a Vacuum Brake Booster Check Valve Last?
The The braking system on your car requires a lot of pressure. The vacuum booster is one of the main sources of this pressure. This booster will take the pressure that is put on the brake pedal and minimize it...
A Buyer’s Guide to the 2012 Acura TSX SportWagon
The The 2012 Acura TSX SportWagon has the perfect combination of utility and performance. The vehicle is pleasant to drive and makes luxury a priority. The TSX SportWagon uses electrically boosted power steering, which provides you with more stability driving...

Are all four rotors the same?

Hi there. On vehicles with four wheel disc brakes and rotors (https://www.yourmechanic.com/services/brake-rotor-disc-replacement), the parts are usually made for front or rear applications - usually meaning that they're not interchangeable. If you are looking to service your brakes elsewhere, our expert...

My check engine light came on after transmission flush? And car is jerking in reverse and wont accelerate

The transmission flush would not fix a transmission light being on or fix any problems. It is to service the transmission and not repair anything. Since the transmission has a problem the check engine light came on since codes are...

Transmission fluid smell

Depending on whether or not any fluid was spilled or if you have a leak (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection) somewhere, this may cause the car to smell a bit like transmission fluid. Assuming you did not spill and you do not have any...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com