GMC G3500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a GMC G3500 Control Arm Assembly Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC G3500V8-7.4LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$346.92Shop/Dealer Price$398.50 - $545.14
1993 GMC G3500V8-6.2L DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$337.91Shop/Dealer Price$387.72 - $533.04
1994 GMC G3500V8-5.7LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$842.39Shop/Dealer Price$1018.35 - $1542.04
1993 GMC G3500V8-7.4LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$380.39Shop/Dealer Price$423.52 - $546.66
1994 GMC G3500V8-7.4LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$337.91Shop/Dealer Price$389.22 - $535.66
1992 GMC G3500V8-6.2L DieselService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$380.39Shop/Dealer Price$423.73 - $547.03
1993 GMC G3500V8-5.7LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$692.55Shop/Dealer Price$831.06 - $1242.39
1995 GMC G3500V8-7.4LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$547.23Shop/Dealer Price$632.07 - $880.34
Show example GMC G3500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

William

35 years of experience
731 reviews
William
35 years of experience
GMC G3500 V8-5.7L - Steering wheel feels loose Inspection - Peoria, Arizona
As usual, William was fantastic, and explained/showed me the issue in detail. He is very customer service oriented & extreamly knowledgeable!!!

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
GMC G3500 V8-7.4L - Car is not starting - Denver, Colorado
He did a great job.

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
GMC G3500 V8-5.7L - Car Starter Repair - Alameda, California
Derrick showed up on time and completed the job on time and is a nice man.

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
GMC G3500 V8-5.7L - Parking brake is stuck - Washington, District of Columbia
Figured out the problem right away that there is no problem with the brakes system.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC G3500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

The Best Tool to Eliminate Air Bubbles
Air bubbles can form while mechanics perform service on coolant systems. A vacuum coolant filler helps eliminate this problem to avoid serious damage.
How to Replace a Combination Switch Assembly
Combination switches include the control of turn signals, windshield wipers, windshield washers, and high beams. Faulty switches can cause accidents.
How Do I Prepare My Car for Winter?
Your Your car needs special care and attention during the cold months. To keep it running smoothly, follow these steps: Change your oil and oil filter regularly: Make sure you follow the recommendations as specified in your manual. You might...

Can't find shop who will replace timing belt on foreign car

Hello. It is very hard to say when a timing belt will break (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-belt) as some fail before the required mileage and some go way beyond the recommended period. Either way you need to have this done as soon as...

Hard braking causes steering wheel to shake

It seems that you may be correct. I am here to help and hopefully find your issue. Find a road where you can get up to around 30-40 miles per hour and lightly press on the brakes. Press on them...

After a tune up I got a misfire in cylinder 3.

The hissing sound may be an indication of a vacuum leak, which may be causing the hesitation and misfire. High idle speeds or in some cases rough idle, stalling and hissing sounds are common signs of a vacuum leak. When...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com