Ford Taunus Clutch pedal goes all the way to the floor Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Clutch pedal goes all the way to the floor Inspection Service

How much does a Clutch pedal goes all the way to the floor Inspection cost?

On average, the cost for a Ford Taunus Clutch pedal goes all the way to the floor Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1961 Ford TaunusL4-1.7LService typeClutch pedal goes all the way to the floor InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1960 Ford TaunusL4-1.5LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1962 Ford TaunusL4-1.7LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1962 Ford TaunusL4-1.5LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1961 Ford TaunusL4-1.5LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1960 Ford TaunusL4-1.7LService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford Taunus Clutch pedal goes all the way to the floor Inspection prices

Like your brake pedal, your clutch pedal should have a firm feel when you press it. It should offer resistance as you push it toward the floor, and stop shy of the actual floorboard. When you depress the pedal, you should also be able to change gears. However, if your clutch pedal goes all the way to the floor and you can’t change gears, there’s definitely something wrong. The problem will depend on the type of clutch system in your car.

How this system works:

There are two types of clutch systems used in manual transmission vehicles – cable operated and hydraulic. Cable systems were more common a few years ago, but hydraulic systems have gained in popularity, so there’s a 50/50 chance you’ll have either.

The simplest way to tell is to open the hood and see if you can spot two components on the firewall that look like master cylinders. One is the master cylinder for your brakes, and the other is the clutch master cylinder. If you don’t see two things that look like master cylinders, you have a cable-operated clutch.

If you have a cable-operated clutch, chances are good that the cable has broken (this is very common, and will occur as your car ages unless you take preemptive action and replace the cable before it snaps). The cable runs from the clutch pedal to the clutch assembly itself, and allows you to engage the clutch and change gears.

If you have a hydraulic clutch, the problem is likely with the master or slave cylinder. These work in the same way as your brake hydraulic system. When you press the pedal, it pressurizes the fluid in the system, which then allows you to change gears. If the fluid is low, or the master or slave cylinder has failed, you won’t be able to change gears.

Common reasons for this to happen:

  • Broken Clutch Cable: The most common reason to have a clutch pedal that goes all the way to the floor is a broken clutch cable. This is extremely common, particularly on older cars. Replacing the cable will allow you to engage the clutch and change gears once more.

  • Missing Connector Rod: The clutch cable runs to a throw out fork and bearing. It connects with a small rod. If this rod is missing, the cable won’t attach to the fork and your pedal will go to the floor.

  • Low Fluid: If you have a hydraulic clutch, there are a couple of other things it could be. One is low fluid in the master/slave cylinder. This can be checked by visually inspecting the reservoir. If the fluid is below the “full” line, then you have low fluid.

  • Failed Clutch Master Cylinder: The most common way for a clutch master cylinder to fail is for the internal seals to begin leaking fluid out (meaning that you’ll be low on fluid). This fluid may or may not run onto the clutch pedal, and it may or may not be visible on the firewall or the back of the engine.

  • Failed Slave Cylinder: A failed slave cylinder is less common than a failed master cylinder, but the symptoms (and causes) are generally the same. Seals break down and begin leaking, leading to low fluid levels in the system.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch pedal, the cable or hydraulic system to verify operation and determine the actual cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the clutch pedal, as well as its connection to either the clutch cable or the master cylinder. The mechanic will check the fluid level in the reservoir if this is a hydraulic system, as well as inspecting for leaks.

How important is this service?

If your clutch pedal goes to the floor, you won’t be able to engage the clutch, and you won’t be able to shift gears. In short, you’ll be stuck. Driving without an operable clutch cable is not recommended. One of our professional mechanics can inspect and repair your clutch system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Jarred

10 years of experience
33 reviews
Jarred
10 years of experience
Ford F-250 V8-6.9L Diesel - Clutch pedal goes all the way to the floor - Denver, Colorado
Love this service and Jarred was on time and very professional!

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Ford Fiesta L4-1.6L - Clutch pedal goes all the way to the floor Inspection - Columbia, South Carolina
Curtis was professional, knowledgeable and a pleasure to work with.

Michael

25 years of experience
187 reviews
Michael
25 years of experience
Ford F-150 L6-4.9L - Clutch pedal goes all the way to the floor - Las Vegas, Nevada
Michael was very professional. He knows his business.

Genaro

13 years of experience
287 reviews
Genaro
13 years of experience
Ford Ranger L4-2.5L - Clutch pedal goes all the way to the floor Inspection - Houston, Texas
He was prompt and knowledgeable..

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Ford Clutch pedal goes all the way to the floor Inspection services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Does Oil Lubricate an Engine?
Oil is an essential fluid in your car engine. Motor oil lubricates engine parts and prevents car overheating. Changing oil helps extend engine life.
How to Get a Kentucky Driver's Permit
The The state of Kentucky requires that all teen drivers participate in a Graduated Driver Licensing program. The first step in this program is to obtain a learner’s permit, which graduates to a full license as the driver gains experience...
P2659 OBD-II Trouble Code: A Rocker Arm Actuator Ctrl Circuit High Bank2
P2659 means the Powertrain Control Module has detected a short in the rocker arm actuator control circuit which causes reduced engine performance.

How do I remove a CV axle that is stuck in the transmission?

If the CV axle is stuck in the transmission it will likely need to be removed using a bit of force and the correct tool. If you cannot pull the axle out with your hands, then an axle removal tool,...

Car is overheating everytime i drive it for about 15-20 minz

Hello there, many faults will cause your 2004 Cadillac SRX to overheat after driving for 15-20 minutes. When head gaskets fail the most common signs are the coolant level dropping without visible leaks, white smoke from the tail pipe, and...

Flapping noise after I accelerated in low gear

Hello - your symptoms suggest a tire that is separating. IF the tread starts to separate from the structural "belts" - fiber or steel mesh - a tire will make the noises you describe. It also means the tire will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com