Ford E-100 Econoline Club Wagon Valve cover gasket is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(19,242)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(19,242)

Valve cover gasket is leaking Inspection Service

How much does a Valve cover gasket is leaking Inspection cost?

On average, the cost for a Ford E-100 Econoline Club Wagon Valve cover gasket is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1978 Ford E-100 Econoline Club WagonL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1979 Ford E-100 Econoline Club WagonL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Ford E-100 Econoline Club WagonV8-5.0LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1976 Ford E-100 Econoline Club WagonV8-5.8LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1975 Ford E-100 Econoline Club WagonL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1980 Ford E-100 Econoline Club WagonL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1982 Ford E-100 Econoline Club WagonV8-5.8LService typeValve cover gasket is leaking InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1981 Ford E-100 Econoline Club WagonL6-4.9LService typeValve cover gasket is leaking InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Ford E-100 Econoline Club Wagon Valve cover gasket is leaking Inspection prices

Typically made from rubber or cork, a valve cover gasket helps seal the gap between the valve cover and the top of the engine. When this gasket is in place, it prevents oil from leaking out onto the outside of the engine. Because of the tremendous heat produced by an engine, valve cover gaskets may break down over time, causing leaks.

How this system works:

The engine valve cover is typically the topmost part of an engine and is marked with either the name of the manufacturer or the size of the engine. A valve cover gasket is put in place because the metal of the valve cover does not seal tightly enough against the metal of the top of the engine. The rubber or cork material of the valve cover gasket ensures a good seal, and helps prevent oil from spilling out of the top of the engine.

Valve cover gaskets do not typically last the life of a vehicle and should be monitored at the time of every service. Checking for oil around the valve cover is especially important for vehicles with four-cylinder engines because of an increased chance that oil could spill into spark plug tubes, causing misfires.

Oil leaks can cause damage to any engine and should be dealt with immediately.

Common reasons for this to happen:

  • Blown Valve Cover Gaskets: The tremendous heat an engine produces can cause valve cover gaskets to become brittle and break down over time.

  • Damaged Valve Covers: When replacing your valve cover gasket, a mechanic should also examine your valve cover(s) to make sure they are still intact. Damage to a valve cover could also cause an oil leak.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of the oil leak and make sure the valve cover gasket needs to be replaced. The mechanic will then provide a detailed inspection report outlining the cause of the leak and the cost of any repairs that need to be made.

How it's done:

A mechanic will perform a thorough inspection of the engine bay and determine the source of the leak. If the source seems to be coming from the valve cover gasket, the mechanic will remove the valve cover and gasket. Different engines require different gaskets. Our mechanics will make sure they find the one that fits your vehicle exactly. A poorly-fitting gasket will not be able to do its job as effectively.

After installing the new gasket, the mechanic will examine the valve cover to make sure it is fully intact. If not, the mechanic will replace the valve cover and check the engine oil level. If your engine sprung an oil leak due to a damaged valve cover, your vehicle might be low on oil. Our mechanics will make sure your oil is topped-off before they leave. The mechanic should then start the engine and examine the valve cover gasket again to make sure it was installed properly and is not leaking.

How important is this service?

While a small oil leak may not seem like a major issue, it can lead to both potentially dangerous and potentially costly repairs. A proactive approach to maintaining the life of an engine should include a check for oil around the valve cover. If oil leaks are discovered early, a mechanic can make the necessary repairs and avoid more significant engine issues. Oil leaks of any kind should be taken seriously and should be reported to a mechanic.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(19,242)

Rating Summary
18,054
638
125
102
323
18,054
638
125
102
323

Brandon

18 years of experience
318 reviews
Brandon
18 years of experience
Ford Focus L4-2.0L - Valve cover gasket is leaking - Clayton, North Carolina
Brandon was friendly and professional. He was thorough and straight to the point.

Robert

20 years of experience
1104 reviews
Robert
20 years of experience
Ford Escape V6-3.0L - Catalytic Converter - Denver, Colorado
This is a true mechanic.

Carlos

28 years of experience
511 reviews
Carlos
28 years of experience
Ford Escape V6-3.0L - Window Motor / Regulator Assembly Replacement (Driver Side Rear, Passenger Side Rear) - Diamond Bar, California
Carlos went right to work and got the repairs done promptly and professionally.

Adam

17 years of experience
231 reviews
Adam
17 years of experience
Ford Fusion L4-2.5L - Car does not move when I step on the gas pedal - Boynton Beach, Florida
Very knowledgeable and fast. Figured out acceleration problem quickly. 5 stars!

Excellent Rating

(19,242)

Rating Summary
18,054
638
125
102
323
18,054
638
125
102
323
Number of Ford services completed
211662+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Exhaust Supports
Common signs include the exhaust pipe seeming loose or swaying, the muffler hanging to the ground, and the exhaust sounding louder than usual.
How Long Does a Brake Booster Vacuum Sensor Last?
In In order for a car to have the brake power that it needs, there will have to be a sufficient amount of vacuum power. The engine of a car produces a good bit of vacuum power, but it will...
How Long Does a Heater Bypass Tube Last?
In In order for the cooling system on your vehicle to work, you will have to make sure that all of its components are repair free. The thermostat that is on your vehicle helps to regulate the flow of coolant...

After changing radiator and oil, car stalls when coming to stop. Is the motor damaged?

Hello. Stalling can be caused by many things. If the engine is no longer overheating, then it is unlikely that the stalling is directly related to the radiator repair. A few common causes for stalling when braking are a faulty...

I have a 2000 Buick Century and the gas gauge goes up and down

You're guess of the fuel sending unit is a good one. The sending unit is a variable resistor, that changes its internal resistance according to fuel level. This information is then sent as an input to the powertrain control module...

I bled my clutch master cylinder and now how do I get my clutch pedel back up after bleeding Master Clutch Cylinder? Wha asked by

If you refer to YourMechanic's on-line clutch system tutorial (https://www.yourmechanic.com/article/how-to-troubleshoot-a-clutch-pedal-sticking-to-the-floor-by-marvin-sunderland) you will see that there are four possible reasons why the clutch pedal would fail to return, namely: 1) a failed clutch release bearing; 2) a failed slave cylinder; 3)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com