Ford Courier Sedan Delivery Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(75)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(75)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Ford Courier Sedan Delivery Brake Master Cylinder Replacement is $249 with $125 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Ford Courier Sedan DeliveryV8-5.8LService typeBrake Master Cylinder ReplacementEstimate$400.37Shop/Dealer Price$476.09 - $674.00
1960 Ford Courier Sedan DeliveryV8-4.8LService typeBrake Master Cylinder ReplacementEstimate$374.37Shop/Dealer Price$450.11 - $648.04
1960 Ford Courier Sedan DeliveryL6-3.6LService typeBrake Master Cylinder ReplacementEstimate$374.37Shop/Dealer Price$450.11 - $648.04
Show example Ford Courier Sedan Delivery Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(75)

Rating Summary
69
4
2
0
0
69
4
2
0
0

Deane

11 years of experience
340 reviews
Deane
11 years of experience
Ford F-150 V6-4.2L - Brake Master Cylinder - Lakeside, California
Deane was on time(even with the rain) and completed the service quickly and efficiently. He's personable and takes pride in his work. Definitely recommended.

John

27 years of experience
1019 reviews
John
27 years of experience
Ford Mustang V8-4.6L - Brake Master Cylinder - Dickinson, Texas
Excellent !!!

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Ford F-250 V8-7.5L - Brake Master Cylinder - Alhambra, California
very good

Terry

26 years of experience
326 reviews
Terry
26 years of experience
Ford Explorer V6-4.0L - Brake Master Cylinder Replacement - Laveen, Arizona
Terry was on the money. He was on time his job performance was excellent. Work was completed sooner than I expected. This is the way to go folks. Thanks again Terry.

Excellent Rating

(75)

Rating Summary
69
4
2
0
0
69
4
2
0
0
Number of Ford Brake Master Cylinder Replacement services completed
825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Long Does a Trunk Striker Plate Last?
Most Most people use their trunk on a daily basis and never give a second thought to what it takes to make it function. A trunk is just like the front door of a home in regards to what it...
How to Replace a Lost or Stolen Car Title in Nevada
With With so many papers, forms, and cards to keep track of it's only natural that we lose items from time to time. If that lost item happens to be your car title then obviously you've got a bigger issue...
The Guide To Colored Curb Zones in Minnesota
Minnesota Minnesota parking laws: understanding the basics Knowing how and where to park legally in Minnesota is just as important as knowing the rules of being on the road, such as the speed limits and proper signaling and lane changing...

Car moves when I don't accelerate

The cruise control is not the cause of the high idle. It is due to the throttle control actuator, or the idle control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is stuck. You should not try and drive it until the problem is identified and...

how to replace a oil pan gasket on a 2000 chevy silverado

Oil pan and/or pan gasket replacement on this vehicle has to be performed with the Factory Service Manual in hand. There are just simply too many steps, and too much detail to re-count it all here, not to mention the...

Burnt rubber smell then couldn't accelerate or turn wheel & belt broke off

If the serpentine belt is original, that is has 125,000 miles on it, it may have just worn out and broke. However, there is always a possibility that one of the "rotating elements" (pulleys, a/c compressor, alternator, etc.) had a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com