Best Prices for Transfer case fluid is low Inspection

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)


Transfer case fluid is low Inspection Service

If you have a four-wheel drive or an all-wheel drive car, you have more than just the engine and the transmission to worry about. You also have a transfer case, which is responsible for sending power from the transmission to all four wheels via drive shafts. If your transfer case fluid is low, there’s a problem that should be repaired before you can safely drive.

How this system works:

A transfer case does exactly what the name implies – it transfers power from the transmission to the wheels. However, it will work differently depending on the type of vehicle you drive. If you drive a four-wheel drive truck, then the primary wheels are driven by the driveshaft and the transfer case really only comes into play when you engage four-wheel drive mode. However, if you have an all-wheel drive vehicle, or an all-time four-wheel drive system, then the transfer case will be used at all times (because all four wheels must work at once, at all times).

The transfer case mounts to the end of the transmission, and a shaft extends from the transmission into the transfer case. Inside the transfer case, there are internal forks and gears that are responsible for transmitting the rotational power of the transmission to two other drive shafts – one going to the rear differential, and another going to the front differential. Within each differential, rotational power is split again, and redirected at 90 degrees to each wheel.

Common reasons for this to happen:

  • Leaking Input Seal at Transmission: If you’re experiencing low transfer case fluid, one of the first possible problems to consider is the input seal on the transmission side of things. Over time and through normal wear and tear, these seals will degrade, eventually letting fluid seep out.

  • Leaking Output Shaft Seal Rear: Another potential problem is the output shaft seal where the rear drive shaft attaches to the transfer case. Like the input seal on the transmission side, this one can also wear to the point that it begins to leak.

  • Leaking Output Shaft Seal Front: You have one other potential seal that might be leaking. This one is located where the front drive shaft connects with the transfer case. Like the other two we’ve mentioned, this seal will eventually degrade and begin to leak.

  • Leaking Vent Hose: While unlikely, it’s possible that you’re losing transfer case fluid from the vent hose.

  • Failed Speed Sensor Gasket: If your transfer case is equipped with a speed sensor, it’s possible that you’re leaking fluid around the sensor (the seal has failed).

  • Leaking Transfer Case Gasket: The transfer case gasket is a lot like an oil pan gasket in that it will eventually degrade to the point that it begins to leak fluid (all gaskets and seals on your vehicle are subject to wear, leakage and eventual failure).

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the leak from your transfer case, as well as the condition of all seals and the level of your fluid. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect the transfer case first to determine the location of the leak. It may be necessary to clean old fluid from the transfer case and then test drive the vehicle to determine the actual source of the leak. The mechanic will also check the level of fluid.

How important is this service?

If your transfer case is leaking, the internals are in danger of experiencing high heat and friction. Just like your differentials and your transmission, the moving parts within the transfer case must be lubricated properly at all times, or damage will result (depending on the setup of your vehicle, damaged transfer case components could leave the vehicle unable to be driven). One of our professional mechanics can inspect your transfer case, determine the point of the leak, and repair the problem.


Recent Transfer case fluid is low Inspection reviews

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Christopher

6 years of experience
25 reviews
Christopher
6 years of experience
Toyota 4Runner V6-3.4L - Transfer case fluid is low - Dacono, Colorado
Appreciated him coming out late and getting it done and giving me a diagnostic on the car

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Mitsubishi Endeavor V6-3.8L - Transfer case fluid is low - Burtonsville, Maryland
worked in the rain did a very good job

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Porsche Cayenne V8-4.8L - Transfer case fluid is low - Huntington Beach, California
Knowledgeable and very efficient.

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Volkswagen Passat L4-1.8L Turbo - Transfer case fluid is low Inspection - Sacramento, California
Very fine, as usual

Recent articles & questions

How to Buy a Good Quality Seat Back Organizer
Does Does it seem like you are constantly misplacing things in the car? Do you have kids that ride in the backseat? Do their belongings seem to be scattered all over the seat and floor at all times? If you’ve...
P2139 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation
P2139 P2139 code definition Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation What the P2139 code means The P2139 code means that an improper voltage correlation between the throttle and pedal position sensors has caused the throttle plate to become...
P0428 OBD-II Trouble Code: Catalyst Temperature Sensor High (Bank 1)
Trouble code P0428 means the PCM receives a high-resolution signal from the optical sensor which means the catalytic temperature sensor is high.

How do I know when the spare tire needs to be replaced?

Like your primary tires, your spare will eventually wear out. However, you should have years of trouble-free use out of it. Because it’s used only during emergencies, it should last a very long time. With that being said, you should...

Smoking and smell of antifreeze

If you engine just started to pour white smoke out the exhaust then most likely you just blew your head gasket. It could be from overheating or corrosion inside engine caused the head to leak coolant into the cylinders and...

What if the abs light comes on, but the car won't start?

Hello, thank you for writing in. The first thing you should do is test the battery, or just go ahead and jump start it. Chances are the battery has simply died. If the vehicle starts, you will want to drive...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

+1 (855) 347-2779 · hi@yourmechanic.com