Dodge D200 Series Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Dodge D200 Series Brake Master Cylinder Replacement is $240 with $145 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1961 Dodge D200 SeriesL6-3.7LService typeBrake Master Cylinder ReplacementEstimate$404.27Shop/Dealer Price$486.59 - $711.05
1967 Dodge D200 SeriesV8-6.3LService typeBrake Master Cylinder ReplacementEstimate$384.27Shop/Dealer Price$466.61 - $691.08
1966 Dodge D200 SeriesV8-5.2LService typeBrake Master Cylinder ReplacementEstimate$384.27Shop/Dealer Price$466.61 - $691.08
1967 Dodge D200 SeriesV8-5.2LService typeBrake Master Cylinder ReplacementEstimate$384.27Shop/Dealer Price$466.59 - $691.04
1964 Dodge D200 SeriesL6-3.7LService typeBrake Master Cylinder ReplacementEstimate$384.27Shop/Dealer Price$466.62 - $691.11
1964 Dodge D200 SeriesV8-5.2LService typeBrake Master Cylinder ReplacementEstimate$384.27Shop/Dealer Price$466.61 - $691.08
1962 Dodge D200 SeriesL6-3.7LService typeBrake Master Cylinder ReplacementEstimate$389.27Shop/Dealer Price$471.47 - $695.84
1963 Dodge D200 SeriesL6-3.7LService typeBrake Master Cylinder ReplacementEstimate$389.27Shop/Dealer Price$471.84 - $696.50
Show example Dodge D200 Series Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(19)

Rating Summary
18
1
0
0
0
18
1
0
0
0

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Dodge Caravan V6-3.3L - Brake Master Cylinder - West Sacramento, California
He was nice and talk to us

Wilson

13 years of experience
296 reviews
Wilson
13 years of experience
Dodge Grand Caravan V6-3.6L - Brake Master Cylinder Replacement - Winter Springs, Florida
Wilson was on Time and Wilson is a very nice pleasant guy.

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Dodge Avenger L4-2.4L - Brake Master Cylinder - Bellwood, Illinois
Awesome service, friendly, and knowledgeable. Would definitely book again 

Timothy

22 years of experience
107 reviews
Timothy
22 years of experience
Dodge Ram 1500 V8-4.7L - Brake Master Cylinder - Sumner, Washington
Tim is very knowledgeable and professional in his work. Honest mechanic that explains the parts and service needed. Treats your vehicle like its his own personal car. Highly recommend Tim for your vehicle maintenance. Will definitely use him in the future.

Excellent Rating

(19)

Rating Summary
18
1
0
0
0
18
1
0
0
0
Number of Dodge Brake Master Cylinder Replacement services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0800 OBD-II Trouble Code: Transfer Case Control System (MIL Request)
P0800 P0800 code definition Transfer Case Control System (MIL Request) What the P0800 code means P0800 is an OBD-II generic code that the engine control module (ECM) got an input from the transfer case control module (TCCM) to turn on...
Washington Parking Laws: Understanding the Basics
Drivers Drivers in Washington are responsible for making sure that their vehicles are not hazards when they are driving on the roads, as well as when they are parked. Whenever you park, you need to make sure that the vehicle...
P3414 OBD-II Trouble Code: Cylinder 2 Exhaust Valve Control Performance
P3414 means a problem in cylinder 2 with the exhaust valve was detected due to a faulty O2 sensor, bad camshaft timing, or a cracked or loose gas cap.

When engine warms up and goes in reverse, it shuts off

Hello there. This is a bit of a rare issue on the 1990 Chevrolet K2500. There are a few possible causes that come to mind with the issues going into reverse. The most common would be a shift solenoid (https://www.yourmechanic.com/services/shift-interlock-solenoid-replacement),...

Hole in tire

Hi There, As you may have noticed, depending on the size of the hole in your tire will determine how quickly the air will leak out. I would recommend having a professional from YourMechanic come to your location to replace...

Oil Change timing

Your vehicle has an on board, computerized oil life indicator system. When the system determines that an oil change is actually needed, the oil life indicator will provide a maintenance message (see your Owner's Manual for further and complete details)....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com