Dodge D100 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(36)

Power Steering Pressure Hose Replacement Estimate for Dodge D100

Dodge D100 Power Steering Pressure Hose Replacement costs $198 on average.

CarServiceEstimateShop/Dealer Price
1977 Dodge D100V8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$290.17Shop/Dealer Price$354.22 - $514.85
1986 Dodge D100V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$290.73Shop/Dealer Price$355.83 - $523.20
1976 Dodge D100V8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$280.17Shop/Dealer Price$342.63 - $502.08
1977 Dodge D100L6-3.7LService typePower Steering Pressure Hose ReplacementEstimate$349.43Shop/Dealer Price$429.19 - $640.56
1975 Dodge D100L6-3.7LService typePower Steering Pressure Hose ReplacementEstimate$349.43Shop/Dealer Price$429.22 - $640.63
1985 Dodge D100V8-5.2LService typePower Steering Pressure Hose ReplacementEstimate$290.73Shop/Dealer Price$355.83 - $523.20
1989 Dodge D100V6-3.9LService typePower Steering Pressure Hose ReplacementEstimate$196.53Shop/Dealer Price$236.70 - $329.56
1985 Dodge D100V8-5.9LService typePower Steering Pressure Hose ReplacementEstimate$285.17Shop/Dealer Price$347.87 - $507.50
Show example Dodge D100 Power Steering Pressure Hose Replacement prices

Power Steering Pressure Hose Replacement Service

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(36)

Rating Summary
36
0
0
0
0
36
0
0
0
0

Richard

20 years of experience
27 reviews
Richard
20 years of experience
Dodge D100 V8-5.2L - Radiator Flush - Yorba Linda, California
Very professional. He took his time and answered all my questions. Thank you Richard.

Peter

25 years of experience
480 reviews
Peter
25 years of experience
Dodge D100 V8-5.9L - Serpentine/Drive Belt Replacement - Pasadena, California
Awesome service, knowledgeable and friendly. Peter's honesty is rare these days. Went above and beyond. Will definitely work with him again. Highly recommended.

Omar

21 years of experience
67 reviews
Omar
21 years of experience
Dodge Ram 1500 V6-3.9L - Power Steering Pressure Hose - Scottsdale, Arizona

PETE

22 years of experience
57 reviews
PETE
22 years of experience
Dodge Dakota V8-4.7L - Power Steering Pressure Hose - Cochranville, Pennsylvania
Pete did an excellent job. He completed the job in a neat and organized manner.

Excellent Rating

(36)

Rating Summary
36
0
0
0
0
36
0
0
0
0
Number of Dodge Power Steering Pressure Hose Replacement services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Replace a Car Window Motor/Window Regulator Assembly
Car window motors and regulators move car windows up and down. If the car window regulator assembly fails, the window will automatically drop down.
B1965 OBD-II Trouble Code: Seat Horizontal Forward/Rearward Potentiometer Feedback Circuit Short to Ground
B1965 means there is an issue with the power seat potentiometer, likely that it is malfunctioning due to an electrical problem.
The Best Tool to Find Coolant Leaks
Diagnosing a car issue can be a tricky without proper tools. A coolant pressure tester is useful for diagnosing overheating issues and coolant leaks.

I have an 07 Ford explorer and I changed the fuel pump and driver module but fuel pump driver module getting power but no power to the pump

High my Lexus IS wont turn on

Check engine light came on and service stabilitrack came on in my 2014 chevy equinox are they related

Possibly, but the only way to know for sure is to download all the trouble codes and evaluate, in total, what is being reported. Also, a final "answer" might depend on what an actual diagnostic and repair reveals. Often faults...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com