Dodge B200 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Dodge B200 Water Pump Replacement is $320 with $168 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1975 Dodge B200V8-5.2LService typeWater Pump ReplacementEstimate$665.50Shop/Dealer Price$786.88 - $1097.02
1975 Dodge B200L6-3.7LService typeWater Pump ReplacementEstimate$487.74Shop/Dealer Price$587.71 - $851.56
1977 Dodge B200V8-5.9LService typeWater Pump ReplacementEstimate$617.50Shop/Dealer Price$738.92 - $1049.09
1977 Dodge B200V8-5.2LService typeWater Pump ReplacementEstimate$617.50Shop/Dealer Price$738.86 - $1049.00
1975 Dodge B200V8-5.9LService typeWater Pump ReplacementEstimate$617.50Shop/Dealer Price$738.96 - $1049.16
1977 Dodge B200L6-3.7LService typeWater Pump ReplacementEstimate$487.74Shop/Dealer Price$587.71 - $851.55
1978 Dodge B200V8-5.2LService typeWater Pump ReplacementEstimate$629.50Shop/Dealer Price$750.59 - $1060.52
1980 Dodge B200V8-5.2LService typeWater Pump ReplacementEstimate$629.50Shop/Dealer Price$751.49 - $1062.08
Show example Dodge B200 Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0

Brian

24 years of experience
200 reviews
Brian
24 years of experience
Dodge B200 V8-5.9L - Car is not starting - Hanover, Pennsylvania
Brian worked very methodically to narrow down the problem I had. It was a starting issue. It seems as though the distributor is the culprit, but I won't know if that is the answer until I replace it with a new one. Brian gave me his phone number to inform him of the results of his diagnosis...He is a pleasure to work with.

Napoleon

27 years of experience
147 reviews
Napoleon
27 years of experience
Dodge B200 * - Car is not starting - Redondo Beach, California
Thank you very much. Napoleon showed up on time and did a wonderful job. I hope he is my mechanic next time I call. Thanks again !! :-)

Jason

32 years of experience
507 reviews
Jason
32 years of experience
Dodge B200 V8-5.2L - Brakes, Steering and Suspension Inspection - San Jose, California
Very patient, kind and considerate. Answered all my questions in a simple way that I could understand. I will always request Jason. Even if he is booked for 2 weeks. I will wait for him to become available. He is worth waiting for. Professional, Competent, Expert, Knowledgable, Goes above and beyond, Friendly, Courteous and Timely.

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Dodge B200 V8-5.2L - Fuel is leaking from gas tank - Grand Terrace, California
Jay was Awesome was happy you sent him !!!hope he finishes the job when get my part !

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0
Number of Dodge B200 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

How Long Does a Trunk Lock Cylinder Last?
A A car has a variety of different safety features that will allow them to keep would be thieves at bay. Among the most beneficial of these safety features are the locks that you have on your doors and on...
How to Replace a Lost or Stolen Car Title in California
Like Like all other states, California requires that vehicle owners have the title to their vehicle for a number of different purposes. If you decide to sell the car, you’ll need the title. You’ll also need it to trade it...
P0085 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 2)
P0085 P0085 trouble code definition P0085 is in reference to the exhaust valve control solenoid circuit bank 2. This may be seen with P0084 and P0086. There are bank 2 and bank 1 solenoids. What the P0085 code means P0085...

How do I reset the sunroof?

If your battery has been disconnected or replaced, then the sunroof will need to be reset before it will start working properly. To reset the sunroof, follow these steps: 1. Turn the ignition to the ON position. 2. Push the...

Won't start unless I wiggled the solenoid harness. Extreme break pressing or shifting through gears several times.

There is a ground or broken wire issue in your vehicle causing the engine to not start. Check the harness to the solenoid and see if there is a loose wire or a broken wire. If the wiring is good,...

If I have a bad throttle position sensor will my car hesitate to start

Hello There, I believe you are correct in that you may have a faulty throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). There are trouble codes that are typically associated with the TPS. One code will set if the TPS voltage is too high...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com