Chrysler Concorde Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chrysler Concorde Power Steering Pressure Hose Replacement is $248 with $94 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Chrysler ConcordeV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$986.66Shop/Dealer Price$1071.64 - $1289.30
2002 Chrysler ConcordeV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$945.21Shop/Dealer Price$1022.06 - $1233.63
2004 Chrysler ConcordeV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$945.21Shop/Dealer Price$1022.18 - $1233.84
1996 Chrysler ConcordeV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$377.25Shop/Dealer Price$426.53 - $568.93
1994 Chrysler ConcordeV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$377.25Shop/Dealer Price$428.44 - $572.29
1995 Chrysler ConcordeV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$692.73Shop/Dealer Price$821.06 - $1200.21
2004 Chrysler ConcordeV6-2.7LService typePower Steering Pressure Hose ReplacementEstimate$928.51Shop/Dealer Price$1001.37 - $1200.56
1993 Chrysler ConcordeV6-3.5LService typePower Steering Pressure Hose ReplacementEstimate$692.73Shop/Dealer Price$820.88 - $1199.89
Show example Chrysler Concorde Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(86)

Rating Summary
74
10
2
0
0
74
10
2
0
0

James

31 years of experience
1039 reviews
James
31 years of experience
Chrysler Concorde V6-3.2L - Car is not starting - Winter Springs, Florida
Great person, knowledgeable, helpful, friendly.

Curtis

30 years of experience
163 reviews
Curtis
30 years of experience
Chrysler Concorde V6-3.5L - Thermostat - Augusta, Georgia
Great job Curtis, fixed overheating issue with a thermostat replacement. Such a convenient service.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Chrysler Concorde V6-3.5L - Shift Selector Cable Replacement - New Port Richey, Florida
Joe was fantastic. Really a life saver after fixing my car. Would recommend him to all friends.

Sha

44 years of experience
39 reviews
Sha
44 years of experience
Chrysler Concorde V6-3.2L - Fuel Pump - Atlanta, Georgia

Excellent Rating

(86)

Rating Summary
74
10
2
0
0
74
10
2
0
0
Number of Chrysler Concorde services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Mazda 2
For For those of you who really just want a car for the sake of transportation—and not towing or for a job where you need to transport tools—you might want to consider the 2012 Mazda 2. This car may not...
Jaguar Certified Pre-Owned (CPO) Car Program
Shopping Shopping for a used Jaguar vehicle often leads many drivers to consider certified pre-owned options. Jaguar is one of many manufacturers that have a certified pre-owned (CPO) program. Each car manufacturer structures their CPO program differently; read on to...
How to Use GhosTrack as a Vehicle Tracking Application
The The GhosTrack application (https://play.google.com/store/apps/details?id=soalib.android.location&hl=en) allows you to track a variety of important things in your life, including your children and your vehicle. The app can help prevent theft (https://www.yourmechanic.com/article/how-to-keep-your-vehicle-safe-from-theft) by allowing you to use two mobile devices to track...

I have a coolant leak in the hose just under the manifold on my 2007 Mazda CX7

If you can see the coolant line that is damaged, and can reach both ends of the hose, you should be able to replace the coolant line rather easily after removing the engine cover and air cleaner. However, on your...

How do you turn on 'horn beep' feature when using the remote in 2017 corolla

Try to hold down the lock button for 5 seconds and while holding it down also press the panic button once. Try this and see if it does the trick? If not then look in the owners manual for remote...

My 2008 Scion tC (hatchback) is making really loud squeaking sounds from rear. It's not the hatchback door or tires, but it is driving me bonkers. It is especially loud when I drive over speed bumps or driveways ... it sounds like a rusty situation but IDK where it's coming from or what I can do ... I'd appreciate your help and response, if you have resources please include those also. Thanks!

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com