Chrysler 300 Ignition Cable (Spark plug wires) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,057)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,057)

Ignition Cable (Spark plug wires) Replacement Service

How much does a Ignition Cable (Spark plug wires) Replacement cost?

On average, the cost for a Chrysler 300 Ignition Cable (Spark plug wires) Replacement is $275 with $135 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chrysler 300V8-5.7LService typeIgnition Cable (Spark plug wires) ReplacementEstimate$425.80Shop/Dealer Price$497.10 - $702.90
Show example Chrysler 300 Ignition Cable (Spark plug wires) Replacement prices

What is the Ignition Cable (Spark plug wires) all about?

The ignition cables, also known as “spark plug wires” are part of the ignition system. They transfer the spark from the distributor or ignition coil to spark plugs that ignite the air-fuel mixture, starting the engine.

Over time, the cables can get weak and break down. This will make it harder for the spark to reach the engine cylinders, resulting in engine misfires. The car may not start at all. If one of the spark plugs has gone bad, the car will still start and run, but it will run poorly.

Keep in mind:

  • Ignition cable failure is often caused by other failing pieces in the ignition system; a mechanic should check for any other malfunctioning parts, and replace any parts of the system that don’t work.
  • Every time the ignition cables are replaced, the spark plugs should be inspected.
  • Leaking oil or coolant can cause ignition wire failure. If this is the case, the cause of the leak should be repaired or replaced, or else the new ignition wires will quickly be damaged as well.

How it's done:

  • Scan the computer system in the car for codes.
  • Inspect ignition cables (look for white spots).
  • Ohm test on individual cables.
  • Remove and replace the cables if found faulty.
  • Inspect the spark plugs.
  • Clear the codes.

Our recommendation:

Ignition wires should be replaced at least every 60,000 miles, but whenever your car is serviced, it’s a good idea to have the entire ignition system inspected. Any time that you have spark plugs replaced, it’s a good idea to have the ignition wires replaced as well. If you notice that your engine is running poorly, you should schedule an inspection.

What common symptoms indicate you may need to replace the Ignition Cable (Spark plug wires)?

  • Check Engine light is on.
  • Engine misfires.
  • Poor gas mileage.
  • Engine may shake (light vibration).

How important is this service?

The fuel in your automobile is ignited by a spark. This starts with the ignition coil, which transforms low voltage power into extremely high voltage. This high voltage is transferred through the ignition cables, and to the spark plug, where a spark is created that ignites the engine’s fuel, and powers the engine.

When one or more ignition cables fail, this voltage will not be transferred from the ignition coil to the spark plugs, and the fuel will not be ignited. Depending on how many of your ignition cables malfunction, your car will either run poorly, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chrysler mechanics

Real customer reviews from Chrysler owners like you.

Excellent Rating

(1,057)

Rating Summary
986
32
10
5
24
986
32
10
5
24

Michael

43 years of experience
152 reviews
Michael
43 years of experience
Chrysler 300 V6-3.5L - Exhaust Gas Recirculation/EGR Valve - La Mirada, California
Very Kind and great Mechanic!

Luis

16 years of experience
244 reviews
Luis
16 years of experience
Chrysler 300 V6-3.6L - Camshaft Position Sensor - Las Vegas, Nevada
Work was diagnosed and completed in an efficient manner. Great job!

Michael

19 years of experience
50 reviews
Michael
19 years of experience
Chrysler 300 V8-5.7L - Oil Change - Hyattsville, Maryland
Excellent

Eric

16 years of experience
138 reviews
Eric
16 years of experience
Chrysler 300 V8-5.7L - Check Engine Light is on - Laurel, Maryland
Eric was great. He was on time and very professional

Excellent Rating

(1,057)

Rating Summary
986
32
10
5
24
986
32
10
5
24
Number of Chrysler 300 services completed
11627+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chrysler MECHANICS
1200+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Line
Common signs include leaking brake fluid, corrosion, and the Brake Warning Light turning on.
Symptoms of Bad or Failing Oil Cooler Lines
Common signs include low oil levels, crimps or bends in the hose, and oil puddles under the car.
How to Know If Your Car Has Been Recalled
Car Car recalls can be annoying. They require you to take time off of work, get in line at the dealership, and sit around while your car is getting fixed. And if the repair takes a few days, you’ll have...

After replacing the alternator and battery car broke down.

This light will only come on if there is an issue with the alternator. This light is an indicator that the battery is no longer being charged. Since the alternator was recently replaced I would recommend starting the inspection there...

After ice storm my car won't start.

Hi there. Check the starter wires and make sure that they are tight and clean. If the wires are good, then try tapping on the starter solenoid. If you hear a click when trying to start the engine, then the...

I've been hearing this strange low pitched "womp womp" sound, I turn left it goes away. I turn right it gets worse.

What you are describing sounds like a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) that may be starting to fail. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com