Chevrolet V1500 Suburban Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(115)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(115)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet V1500 Suburban Intake Manifold Gaskets Replacement is $492 with $86 for parts and $406 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Chevrolet V1500 SuburbanV8-6.2L DieselService typeIntake Manifold Gaskets ReplacementEstimate$839.26Shop/Dealer Price$904.96 - $1068.85
1990 Chevrolet V1500 SuburbanV8-5.7LService typeIntake Manifold Gaskets ReplacementEstimate$651.03Shop/Dealer Price$713.26 - $888.00
1991 Chevrolet V1500 SuburbanV8-5.7LService typeIntake Manifold Gaskets ReplacementEstimate$826.22Shop/Dealer Price$890.76 - $1067.22
1990 Chevrolet V1500 SuburbanV8-6.2L DieselService typeIntake Manifold Gaskets ReplacementEstimate$627.13Shop/Dealer Price$683.46 - $840.32
Show example Chevrolet V1500 Suburban Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(115)

Rating Summary
109
3
0
2
1
109
3
0
2
1

Michael

17 years of experience
606 reviews
Michael
17 years of experience
Chevrolet V1500 Suburban V8-5.7L - Distributor - Atlanta, Georgia
Michael was very knowledgeable and did a great job installing a new distributor in my truck. I would recommend Michael to anyone who needs a good mechanic.

Cyrus

36 years of experience
110 reviews
Cyrus
36 years of experience
Chevrolet V1500 Suburban V8-5.7L - Spark Plugs - Atlanta, Georgia
Cyrus was on time and did a good job on a tune up for my suburban...very knowledgeable mechanic.

Michael

22 years of experience
80 reviews
Michael
22 years of experience
Chevrolet V1500 Suburban V8-5.7L - Car is not starting - Olympia, Washington
Fixed my problem quickly and easily.

Nick

15 years of experience
90 reviews
Nick
15 years of experience
Chevrolet Tahoe V8-5.7L - Intake Manifold Gaskets - Sacramento, California
Never met a hard working mechanic in my life. Nick is great and get the job done.

Excellent Rating

(115)

Rating Summary
109
3
0
2
1
109
3
0
2
1
Number of Chevrolet Intake Manifold Gaskets Replacement services completed
1265+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Utah
Utah is a state with a landscape not quite like any other that varies widely from place to place. At times, travelers find desert expanses that periodically turn into scenes that seem plucked from an abstract work of art with...
How to Read a VIN (Vehicle Identification Number)
A car VIN (Vehicle Identification Number) contains unique information about where the car was made and can be found in your car or online.
What is the Automatic Transmission Fluid Service all about?
How to replace your automatic transmission fluid

What makes my transmission so rough?

In order to tackle this question appropriately, more information would be needed to guide us in the right direction. One question is, does the transmission slowly engages when you first drive your vehicle, or after it has sat for a...

I took my 04 GMC Envoy to better brakes for less as I needed to have it pass smog and the check engine light was on. They said I n

Inasmuch as YourMechanic is mobile, you need not bring the car anywhere as the certified mechanic will come to you and take care of the radiator replacement. If you desire mobile replacement, please simply use YourMechanic's radiator replacement service page...

Check [engine](/topics-engine-chevy/) light keeps coming on, codes 0345 and 44 for crankshaft and [camshaft](/topics-camshaft-chevy/) sensor, have had them replaced twice, once by a local mechanic second time by the dealer who said the replacement was "bad". Today the check engine light came on yet again, engine is still missing and the fan now turns on once the car has shut off, was driving it for no more than 1 minute when I shut it off, 3 seconds of silence and then the fan started

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com