Chevrolet Silverado 1500 LD Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(15,227)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(15,227)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Chevrolet Silverado 1500 LD Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2019 Chevrolet Silverado 1500 LDV8-5.3LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Chevrolet Silverado 1500 LD Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15,227)

Rating Summary
14,268
476
111
84
288
14,268
476
111
84
288

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Chevrolet Aveo L4-1.6L - Radiator Hose Repair - Hayward, California
Tien was very informative and patient. He waited a while longer even when he couldn't get a hold of me to make sure I was home. He went above and beyond to make sure what was going on with the car

Tinashe

13 years of experience
641 reviews
Tinashe
13 years of experience
Chevrolet Cruze L4-1.4L Turbo - Window Motor / Regulator Assembly Replacement (Driver Side Front) - Atlanta, Georgia
Arrived on time, service was quick and the 50pt inspection was needed. Thank you

Chris

11 years of experience
82 reviews
Chris
11 years of experience
Chevrolet Venture V6-3.4L - Crankshaft Position Sensor - Keyport, New Jersey
Chris was really good

Efrain

20 years of experience
93 reviews
Efrain
20 years of experience
Chevrolet Trailblazer L6-4.2L - Shifter Interlock Solenoid - Silver Spring, Maryland
Great Mechanic

Excellent Rating

(15,227)

Rating Summary
14,268
476
111
84
288
14,268
476
111
84
288
Number of Chevrolet services completed
167497+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Good Quality License Plate Light
Whether Whether you are replacing a license plate light, or adding one to your vehicle to be sure that your license plate is visible in all sorts of weather, buying a good quality license plate light can be simple. Cops...
Auto Driving Tips For the New Driver
Congratulations Congratulations - it's your birthday, and it's the day you have been waiting for - you are old enough to get your permit to learn how to drive! While as a driver, you are excited and been waiting for...
P2573 OBD-II Trouble Code: Direct Ozone Reduction Catalyst Sensor Circuit Range/Performance
P2573 code means the sensors do not detect deterioration due to faulty catalyst, oxygen or temperature sensor, or lack of fuel or coolant.

What does the transmission tow/haul feature indicator mean?

The transmission tow/haul feature indicator is located on your instrument panel. This light illuminates steady when the tow/haul feature is turned on. If the light is flashing, then the system is not operating properly, as your vehicle should be serviced...

After the change of alternator my car needs accelerator..Rpm goes up but speed meter goes slow. it jerks win out n hear. D blinks

Hi there. If this occurred right after the alternator was replaced then the connections need to be checked first. If the connection on the alternator is loose then this can occur. The output of the alternator (https://www.yourmechanic.com/services/alternator-replacement) needs to be...

The glow plug goes turn on after driving for 10 minutes. When turning the engine on and off, it does not apear again.

Hi there. The glow plug light comes on when the computer is detecting an issue with the glow plugs to the engine. There are stored codes and pending codes. If the light goes out after turning the key off and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com