Chevrolet Impala Limited Car is taking longer than normal to stop Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(26)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(26)

Car is taking longer than normal to stop Inspection Service

How much does a Car is taking longer than normal to stop Inspection cost?

On average, the cost for a Chevrolet Impala Limited Car is taking longer than normal to stop Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Chevrolet Impala LimitedV6-3.6LService typeCar is taking longer than normal to stop InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Chevrolet Impala LimitedV6-3.6LService typeCar is taking longer than normal to stop InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Chevrolet Impala LimitedV6-3.6LService typeCar is taking longer than normal to stop InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Chevrolet Impala Limited Car is taking longer than normal to stop Inspection prices

Most of us are so accustomed to how automotive brake systems work that we take them for granted. When you press the brake pedal, your car should slow down and stop. What’s more, it should do that in a normal amount of time. Of course, braking time varies on a number of factors, including vehicle weight, road conditions, speed and more, but drivers can usually estimate the amount of time needed for their car. If it seems to be taking longer than normal to stop, there may be a problem with the system.

How this system works:

Your brake system works on a relatively simple principle, although it requires a significant number of components in order to do its job. Fluid pressure and friction are the two primary factors here. Fluid pressure is created by the booster and master cylinder.

Pressurized brake fluid is then sent through your brake lines to the caliper, which squeezes the rotor between two brake pads – an inner pad and an outer pad. This creates friction. The material used in brake pad manufacturer is specially designed to withstand the high heat and pressure created.

However, pads and rotors do wear out over time. Additionally, significant heat can create problems like “brake fade”, which can result in longer stopping distances.

Common reasons for this to happen:

  • Worn Brake Pads: The most common cause of a car taking longer than normal to stop is simple brake wear. If it has been some time since your pads were changed and your rotors resurfaced, it might be a wise decision to have that service done now.

  • Brake Fade: Brake fade is noticeable in many situations, but the best example is driving down a curving mountain road that’s descending. You’re generally forced to keep your foot on the pedal and “ride” your brakes. This creates immense amounts of heat that affect the pads and rotors, resulting in reduced braking performance and longer stopping times. Brake fade is generally a temporary condition. When the pads and rotors cool, they should be back to almost normal.

  • Low Fluid Level: Your brakes work on hydraulic pressure. This means that fluid is required for them to operate. If the fluid is low, you’ll notice that it takes you longer to stop than normal. If the fluid level gets too low, the brakes won’t work at all.

  • Stuck Caliper: In order for your brakes to slow and stop your car normally, both front calipers need to be in good working condition. If your car takes longer than normal to stop, it could mean that one of the calipers is seized or not sliding on the slide pins correctly.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system, including the condition of the pads and rotors, the level of the fluid and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

Our mechanic will need to inspect the entire brake system, starting with the pads and rotors. The condition of the pads, rotors and calipers will be noted, and the mechanic will also inspect the master cylinder and the level of the brake fluid in the system.

How important is this service?

If your car is taking longer to stop than usual, it’s not a good sign. While it might be temporary brake fade due to high heat and riding your brakes, it may be a sign of a deeper problem. You should have your brakes regularly inspected during all basic maintenance (such as oil changes) and keep an eye on the condition of the system. If you’re experiencing any unusual brake performance, our professional mechanics can have the problem diagnosed and repaired in no time.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Choeun

15 years of experience
181 reviews
Choeun
15 years of experience
Chevrolet Impala Limited V6-3.6L - Power Steering Pump - Richmond, California
Choeun arrived at my residence actually early discussed what he was going to do and performed the job under difficult circumstances being the location of the car he was very professional and finished at the time he quoted me on I would definitely recommend Choeun and i will use him again he is very knowledgeable.

Travis

13 years of experience
160 reviews
Travis
13 years of experience
Chevrolet Impala Limited V6-3.6L - Brake Pads Replacement (Front) - Charlotte, North Carolina
ON time, Knew what he ws doing and did the job right.

Rodrigo

15 years of experience
133 reviews
Rodrigo
15 years of experience
Chevrolet Impala Limited V6-3.6L - Car is making a noise - Las Vegas, Nevada
Through

John

36 years of experience
441 reviews
John
36 years of experience
Chevrolet Impala Limited V6-3.6L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Richmond, California
Great guy would consult with him again.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Chevrolet Impala Limited services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Does the Viscosity of Your Oil Affect the Filter You Should Use?
Most Most people who drive a vehicle know that an engine needs oil to operate smoothly. Oil lubricates the various surfaces and components of the engine’s system to help it run as efficiently as possible. Not everyone, however, knows that...
P0411 OBD-II Trouble Code: Secondary Air Injection System Incorrect Flow Detected
P0411 code definition The P0411 DTC is a generic OBD-II code that points to a malfunction within the secondary air injection system....
P0990 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch E Circuit High
P0990 means there is an issue with the transmission fluid pressure sensor or switch, likely due to a fluid or component issue.

When A/C is on, the car overheats

Engine overheating with AC on is generally caused by one of two possibilities. One, is increased engine load caused by a failing AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement). The AC compressor adds rotational load to the engine and if the compressor is wearing...

Jeep stopped acclerating, brakes locked up, power steering fluid everywhere 2000 Jeep Grand Cherokee

Hi - first task is to check for problem codes (Check Engine light) - these will be helpful. From your symptoms, and the sequence, I believe the engine lost oil (https://www.yourmechanic.com/question/oil-loss-by-ryan) suddenly (failed oil cooler line or front crank seal?),...

Overheating to 3/4

Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or a failing coolant fan switch. As you may know the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com