Chevrolet Cobalt Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(21)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(21)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Chevrolet Cobalt Car Battery Replacement is $313 with $173 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chevrolet CobaltL4-2.0L TurboService typeCar Battery ReplacementEstimate$500.90Shop/Dealer Price$590.98 - $853.10
2007 Chevrolet CobaltL4-2.4LService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.20 - $841.00
2008 Chevrolet CobaltL4-2.4LService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.22 - $841.04
2006 Chevrolet CobaltL4-2.0L TurboService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.22 - $841.04
2009 Chevrolet CobaltL4-2.0L TurboService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$581.70 - $843.62
2008 Chevrolet CobaltL4-2.2LService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.36 - $841.29
2010 Chevrolet CobaltL4-2.0L TurboService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.24 - $841.07
2006 Chevrolet CobaltL4-2.4LService typeCar Battery ReplacementEstimate$491.89Shop/Dealer Price$580.22 - $841.04
Show example Chevrolet Cobalt Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0

David

5 years of experience
188 reviews
David
5 years of experience
Cobalt 2007 - Battery - Altamonte Springs, FL
David came out to replace our battery. Friendly and professional. He gave us a recommendation on other items on our car that needed addressed and we booked him again for this weekend.

Joshua

6 years of experience
35 reviews
Joshua
6 years of experience
Cobalt 2006 - Check Engine Light is on - Lewisville, TX
Joshua was very nice and cordial. He was very quick and explained everything in clear words! Also, I really appreciate that he was exactly on time! Thank you!

Yoel

5 years of experience
187 reviews
Yoel
5 years of experience
Cobalt 2006 - Car is not starting - Philadelphia, PA
Did a great job new what was wrong with it

Chuck

4 years of experience
271 reviews
Chuck
4 years of experience
Cobalt 2008 - Tune-up - Dallas, TX
Awesome work!

Excellent Rating

(21)

Rating Summary
20
1
0
0
0
20
1
0
0
0
Number of Chevrolet Cobalt Car Battery Replacement services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Is It Safe to Drive With the Transmission Temperature Light On?
Most people don’t know very much about vehicle transmissions, and realistically, why should they? All you want to do is get in...
Symptoms of a Bad or Failing Coolant Level Sensor
If the Coolant Light stays on permanently, there is low coolant, or the engine is overheating, you may have to replace the coolant level sensor.
P2785 OBD-II Trouble Code: Clutch Actuator Temp Too High
P2785 means that the temperature for the clutch actuator has exceeded the recommended limits due to worn out clutches, or overheating engines.

not central locking. why?

Hello and thank you for contacting YourMechanic. You can determine which doors are unlocked through the central locking system in the MMI. When operating the MMI, select the 'Car' function button then select 'Systems' the select 'Central Locking'. You can...

Transmission stuck in gear in Drive 2007 Chevrolet Silverado 2500

Hi there - it's possible that your problem source is the torque converter lockup clutch (https://www.yourmechanic.com/question/car-hesitates-and-then-jerks-to-go-into-first-gear-by-brenda) NOT releasing as the truck slows down. This would lug the engine as though it's in top gear until vibration, or an engine stop/start...

2007 Nissan Maxima · SE Sedan 4D

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com