Chevrolet Captiva Sport Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(98)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(98)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chevrolet Captiva Sport Power Steering Pump Replacement is $430 with $178 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Chevrolet Captiva SportL4-2.4LService typePower Steering Pump ReplacementEstimate$1002.92Shop/Dealer Price$1190.38 - $1738.18
2012 Chevrolet Captiva SportV6-3.0LService typePower Steering Pump ReplacementEstimate$934.20Shop/Dealer Price$1105.36 - $1611.40
2015 Chevrolet Captiva SportL4-2.4LService typePower Steering Pump ReplacementEstimate$618.26Shop/Dealer Price$710.48 - $979.60
2012 Chevrolet Captiva SportL4-2.4LService typePower Steering Pump ReplacementEstimate$986.70Shop/Dealer Price$1171.03 - $1716.47
2013 Chevrolet Captiva SportL4-2.4LService typePower Steering Pump ReplacementEstimate$986.70Shop/Dealer Price$1173.68 - $1721.12
Show example Chevrolet Captiva Sport Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1

Jonathan

23 years of experience
23 reviews
Jonathan
23 years of experience
Chevrolet Captiva Sport L4-2.4L - Brake Pads Replacement (Front) - Fayetteville, North Carolina
Jonathan was absolutely Fantastic! He is now my personal mechanic! I'm very impressed with this service. Thank you Sir for such great work!

Octavio

13 years of experience
77 reviews
Octavio
13 years of experience
Chevrolet Captiva Sport L4-2.4L - Transmission Fluid Service - Kissimmee, Florida
Another great experience with your company! He was friendly and explained everything to a way less knowledgeable car owner like myself! I will continue to use this amazing service!

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Chevrolet Captiva Sport L4-2.4L - Check Engine Light is on Inspection - Bellwood, Illinois
Timely and very efficient! He explains everything as well let’s you know what is needed next! I won’t book anyone else but him! Very knowledgeable!

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Chevrolet Captiva Sport L4-2.4L - Check Engine Light is on - San Diego, California
Very good

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1
Number of Chevrolet Captiva Sport services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Drive a Prius in the Winter
Driving Driving during extreme weather conditions brings its own challenges. For example, snow and ice can make roads slippery, causing drivers to lose control of their vehicles. It can also be hard to stop when the roads are too slick....
How Long Does a Fuel Pump Relay Last?
The The fuel pump is among the most used parts on any car. Each time the car is started and ran, the fuel pump will have to perform. There are a variety of parts that help the fuel pump to...
P3450 OBD-II Trouble Code: Cylinder 7 Deactivation/Intake Valve Cotrol Performance
P3450 means intake and exhaust valves may not open on required cylinders due to low oil pressure, impaired oil movement in engine, or wiring.

Noise after oil change

Hi, thanks for writing in. I'd be happy to offer my insight. It seems that the oil pump lost its prime when it drained for 8 hours with the oil filter off. I recommend removing the oil filter and filling...

Slight jerking when driving and sputtering going up hills.

This may be a sign of a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being...

Rich idle only, negative STFT

Some common causes of too much fuel being delivered in a situation like that you describe are: a faulty coolant temperature sensor (the temperature signal is a part determinant of injector pulse width); leaking fuel injector(s) allowing too much fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com