Cadillac STS Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(135)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(135)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Cadillac STS Valve Cover Gasket Replacement is $208 with $208 for parts and $0 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Cadillac STSV8-4.6LService typeValve Cover Gasket ReplacementEstimate$1197.14Shop/Dealer Price$1350.40 - $1746.39
2009 Cadillac STSV6-3.6LService typeValve Cover Gasket ReplacementEstimate$1066.25Shop/Dealer Price$1226.29 - $1683.30
2011 Cadillac STSV6-3.6LService typeValve Cover Gasket ReplacementEstimate$934.13Shop/Dealer Price$1061.28 - $1419.31
2009 Cadillac STSV8-4.6LService typeValve Cover Gasket ReplacementEstimate$1202.86Shop/Dealer Price$1353.96 - $1774.36
2006 Cadillac STSV8-4.4L TurboService typeValve Cover Gasket ReplacementEstimate$1101.56Shop/Dealer Price$1242.01 - $1605.64
2006 Cadillac STSV8-4.6LService typeValve Cover Gasket ReplacementEstimate$1202.86Shop/Dealer Price$1355.07 - $1776.30
2007 Cadillac STSV6-3.6LService typeValve Cover Gasket ReplacementEstimate$883.95Shop/Dealer Price$998.64 - $1319.09
2010 Cadillac STSV6-3.6LService typeValve Cover Gasket ReplacementEstimate$1050.69Shop/Dealer Price$1206.97 - $1652.41
Show example Cadillac STS Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(135)

Rating Summary
123
6
1
3
2
123
6
1
3
2

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Cadillac STS V8-4.6L - Check Engine Light is on - Tucson, Arizona
Awesome guy, Smart and knows his stuff. Did a fantastic job on my Cadillac. You want your car fixed ask for Nolan.

Chris

22 years of experience
42 reviews
Chris
22 years of experience
Cadillac STS V6-3.6L - Car is shaking or vibrating - Stone Mountain, Georgia
He came to appointment early on New Year's Day! What more is there to say. Called to confirm arrived ahead of schedule and got right to work. Found error codes on check engine light made suggestions cleaned and fixed issue. Thanks again to Your mechanic for finding my mechanic.

Daniel

31 years of experience
40 reviews
Daniel
31 years of experience
Cadillac STS V6-3.6L - Car is not starting - Raleigh, North Carolina
Daniel had a car issue getting to my house but called and updated me regularly. Once there, he was great !! He quickly diagnosed my problem and we have a next appointment to complete the repair. Very personable and knowledgeable. Glad that Daniel is the one working on my car and I wouldn't hesitate to use him again. I have already recommended Daniel and this service to my colleagues here at work

Ronald

42 years of experience
519 reviews
Ronald
42 years of experience
Cadillac STS V8-4.6L - Check Engine Light is on - Humble, Texas
Very informative and knowledgeable, I felt comfortable with the service I received

Excellent Rating

(135)

Rating Summary
123
6
1
3
2
123
6
1
3
2
Number of Cadillac STS services completed
1485+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

P0058 OBD-II trouble code: HO2S Heater Control Circuit High (Bank 2 Sensor 2)
P0058 P0058 trouble code definition The definition of the trouble code P0058 is heated oxygen sensor heater control circuit high voltage bank 2 sensor 2. What the P0058 code means When this code is stored in the powertrain control module...
Symptoms of a Bad or Failing Cruise Control Vacuum Bleed Switch
Common signs include cruise control disengaging on its own or not disengaging when the pedal is pressed, and a hissing noise coming from the dash.
How Long Does an Engine Mount Last?
Your Your car needs its engine in order to run properly, and with that said it needs to be placed in your vehicle in the exact right position. All kinds of parts/components are running in and out of the engine,...

Car not accelerating past 60 MPH

Hi there, this is a common issue with Rogues around this time and usually has to do with heat. The transmission in this car has a heat sensor that doesn't allow the fluid to get too hot. On long journeys,...

Keyless start problem

Hello there. This is not uncommon at all. The most likely causes would be the start button, ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), starter (https://www.yourmechanic.com/services/starter-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), or a wiring issue. Since this is an intermittent issue, your best bet is to try...

Jerking motions during turns and minor jerks or surges at highway speed

You should first make sure all 4 tires are of the same size and brand of tire with similar amount of wear (https://www.yourmechanic.com/article/how-to-check-if-your-tires-are-in-good-condition). Tires that are different sizes or amount of wear will turn at a different rates and can...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com